User manual

WideFly Ltd. WF28 User Manual
http://www.widefly.com rev 1.1
P.21
Wi-Fi Auto Retry
Start > Settings > Control Panel > WLAN > Advance (Tab page)
When PDA is out of signal range of a designated AP (single SSID),
system would start searching for another one in a limited duration
defined in “Auto Off WLAN after disconnected”. It is a design to
prevent battery from drained quickly as Wi-Fi searching consumes
lots of power. For example, WLAN will be off once searched for
more than 1minute.
If “Auto retry WLAN connection” is enabled, system would wait for 1
minute in WLAN off state and restart WLAN searching
automatically. These auto off & retry mechanism helps balance
the need of Wi-Fi connectivity and power saving. It also enables a
predictable pattern of Wi-Fi connection mechanism.
When WLAN is auto off, system popup a dialog box at the bottom
right hand corner and waits for next Wi-Fi auto retry. User may tap
this box to force WLAN to start searching without waiting for next
retry.
System comes with an end user utility for manual WLAN restart. It
is located at \Windows\WiFiForceRescan.exe.
To create a shortcut, copy the exe and “past shortcut” on the
desktop.