User's Manual

ezWAVE Cards Users’ Guide Version 1.6

Page 17 of 36

3.1.2 PC Card (PCMCIA) Network Configuration

If you have completed PC card installation, insert the PC card. If

you PC detects the PC card, you can find glittering LED and PC

sound. Also you will see the PC card icon on the right bottom of

your screen.

When you install Widelink’s wireless LAN card, all the setup

process runs automatically. If you reinstall the install program, it asks the positions of

“ezWAVE.inf” and cw10sys. Then you should select same as the below:

File name Path

ezWAVE.inf c:\windows\inf

cw10.sys c:\windows\system

And then the install program asks whether you want to reboot your computer. At this

point you should select “No” in order to complete the installation correctly.

Click on My Computer icon. Select the Device manager and network adaptors. If you

find yellow (?) sign on the adaptor, it indicates that the installation is not successful.

Select the adaptor and click on Remove. Restart your computer after uninstalling the

driver to make the change effective.

Click on the Network Neighborhood and select properties from the pop-up menu. The

network box appears and you see three main tabs; Configuration, Identification, Access

control.

Click on the configuration tab and then click on add button. Select network component

type box appears. Click on the protocol then click the add button.

Select network protocol box. From the list of manufactures, click on Microsoft. From the

list of network protocols, select NetBEUI and click OK.

The NetBEUI protocol is now installed. After click on OK, return back to Network

Component Type box.

Repeat this protocol add procedure to add IPX/SPX protocol and TCP/IP protocol.