User's Manual

ezWAVE Cards Users’ Guide Version 1.6

Page 27 of 36

faced out of your computer and be visible when you put the cover back on. The bottom

edge of the card is a connector, which you will insert into an empty expansion slot in

your computer.

3.2.1 Installing PCI Card Adapter

1. Turn off the computer and all its components.

2. Remove the computer cover.

3. Remove the screw from the top of the CPU back panel above an empty expansion

slot. This screw is used to hold the metal bracket on the back panel.

4. Tilt the client adapter to allow the antenna connector and LED lights to slip through

the opening in the CPU back panel.

5. Press the client adapter into the empty slot until it is connected firmly.