User's Manual

ezWAVE Cards Users’ Guide Version 1.6

Page 28 of 36

Caution

Do not force the client adapter into the slot. Forcing it will damage both the card and the

slot. If the card does not go in easily, remove the card and reinsert it.

6. Reinstall the screw to the top of the CPU back panel.

7. The client adapter comes with one 2dBi dipole antenna. With the unit powered off,

attach the antenna to the antenna connector on the client adapter.

Caution

Do not over-tighten the antenna connector; finger-tight is sufficient. Position the antenna

vertically for best omni-directional signal reception.