User's Manual

ezWAVE Cards Users’ Guide Version 1.6

Page 31 of 36

 Make sure that the PC card is started as automatic in the device applet of the

Control panel.

 Double click on the PC card icon in the Control panel. Click on Widelink adapter

and then click on the properties button. It should state that the driver started

correctly.

 Make sure the drivers were installed correctly. If there is some warning or error,

uninstall drivers and software through Add/Remove Program. Remove the

Wireless LAN card and reinstall the drivers following the manual.

 Make sure that the client computer is within the range of an AP and uses same

SSID as you.

 Make sure that your TCP/IP is set properly and correctly.

Cannot connect to some computers

Cannot connect to some computersCannot connect to some computers

Cannot connect to some computers