Operation Manual

20 21
Audio input
Bravo can be furnished with an
audio shoe. This allows direct
connection to CROS/BiCROS
systems as well as assistive lis-
tening devices such as FM equip-
ment, hand-held microphones,
TVs, and cassette players.
Connecting the audio shoe
A Europlug is used for connec-
tion. Insert the plug into the
socket on the base of the audio
shoe. Please note that the plug
will only connect one way, as
one of the three pins is thicker
than the other two.
Make sure that the M-MT-T switch is set to M
(microphone).
Before connecting, the little
cover on the side of the hear-
ing aid must be replaced with
the cover which has one hole.
Slide the audio shoe
onto the hearing aid, as
shown. Press the shoe
gently onto the aid un-
til you feel a click.
Remove the audio shoe
by gently sliding it off
and pulling it away
from the hearing aid,
as shown.