Operation Manual

6 7
Volume control
Your hearing aid has a digi-
tal volume control, shaped
like a small lever. Push the
lever upwards to raise the
volume. Push the lever down-
wards to lower the volume.
Use short touches for minor
corrections of the volume.
Faster adjustments are ob-
tained by keeping the lever
pressed for some seconds.
When you raise the volume, you will hear a beep-
tone for each step the volume is raised. When the
maximum adjustment level is reached, a steady
tone will sound until you release the lever.
When you lower the volume, you will hear a deep-
er beep-tone for each step the volume is lowered.
When the minimum adjustment level is reached,
a steady tone will sound until you release the le-
ver.
Bravo is equipped with a computer which has
been designed to adjust its sound automatically in
accordance with the sound environment around
you.
Several thousand times per second, Bravo ana-
lyses the surroundings and tailors its sound ac-
cordingly.
Therefore, with this digital instrument you only
need to adjust the volume to obtain an as natural
and comfortable sound as possible.
Any adjustment of the automatic volume setting
will be cancelled when your hearing aid is turned
off. Therefore, you must adjust the volume again,
if desired, each time you turn the hearing aid on.
Important: B11 and B12 are powerful hearing
aids. If the volume in your hearing aid is uncom-
fortably loud or too weak, or if you would like any
further information, consult the hearing health-
care professional where you received your hear-
ing aid.