Operation Manual

16 17
Removing Bravo
First remove the hearing aid from its position be-
hind the ear. Carefully pull the earmould out of
the ear canal, while holding the lower part of the
tubing. If it is difficult, it may help to try to move
the earmould carefully from side to side while
pulling it out. It may also help to pull the outer
ear upwards and backwards with the opposite
hand.
In case of malfunction
Should your hearing aid be completely or periodi-
cally dead, try the following before consulting
your hearing healthcare professional:
• Make sure the hearing aid is switched on.
• Disconnect the tubing with earmould from
the hook of the hearing aid and check if
there is moisture in the tubing or earmould.
• Check that the earmould is not blocked by
earwax. Disconnect the tubing with ear-
mould from the hook of the hearing aid and
try to blow air through the earmould with a
small blower.
• Change the battery and make sure the new
battery is correctly inserted.
See the Troubleshooting guide p. 30-31.