User manual

22
Switching between the listening programs
If you have a remote control, you can change programs
with a simple push of the program key. Each time you
change program, an acoustic indicator will sound unless
this function has been disabled.
Program Messageoroneshortbeep
Program Messageortwoshortbeeps
Program Messageorthreeshortbeeps
Program Messageoronelongandoneshortbeep
Program Messageoronelongandtwoshortbeeps
Zen Messageortone
In the default setting, both your hearing aids will be af-
fected when you change programs.
Zen+
This program is accessed via a long press (more than
1 second) on the remote control program key. A short
press then allows you to cycle through the available
Zen styles.
You can exit Zen+ by pressing and holding the program
key for more than 1 second.