User's Manual Part 2
122
123
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in metres (m) can be estimated
using the equation applicable to the frequency of the transmitter, where
P is the maximum output power rating of the transmitter in watts (W)
according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies
NOTE 2 These guidelines may not apply in all situations. Electromag-
netic propagation is affected by absorption and reflection from struc-
tures, objects and people.
This COM-DEX may be interfered with by other equipment even if that
other equipment complies with CISPR emission requirements.
EMCEMICompliance
The COM-DEX complies with the following EMC/EMI standards:
Standard Test type Note
47 CFR Part
15, subpart C
RF emissions USA Federal Communications Commis-
sion (FCC) requirements to intentional
radiators.
EN 300
330-2 V1.6.1
RF emissions
incl. Spurious
emission
EMC and radio spectrum matters for
Short Range Devices in the frequency
range 9 kHz – 25 MHz
EN 300 328
V1.9.1
RF emissions
incl. Spurious
emission
EMC and radio spectrum matters for
data transmission systems in the 2.4
GHz ISM band and using wide band
modulation techniques
IEC 60601-1-
2:2007
EMC emission
Immunity, RF
and ESD
Medical electrical equipment.
General requirements for basic safety
and essential performance.
Electromagnetic compatibility.
9 514 0313 080_booklet.indb 122 21-08-2015 14:03:49