User Manual

19
CAUTION
If the volume in the hearing aid is generally too loud or too
weak, or the reproduced sounds are distorted, or if you would
like any further information, consult your hearing care profes-
sional.
To mute the hearing aid with a remote control:
Keep pressing the volume down key on the remote
control after the long beep-tone has sounded and until
it stops. Pressing one of the volume keys briefly will
bring back the sound.
Lost partner alarm
(Note: Only applicable if this feature is available and
has been activated by your hearing care professional).
If one of your hearing aids falls off your ear, and/or the
battery is exhausted, a tone signal and a spoken mes-
sage will sound two times in the other hearing aid, and
the diode will flash on both hearing aids.
When the lost hearing aid is repositioned, and/or the
battery is exchanged, the diodes stop flashing.