Operation Manual

26
27
The earmould
Make sure that your earmould is clean and free of ear-
wax and moisture. Never use alcohol or other cleaning
solutions to clean the earmould.
Cleaning the earmould:
1. Disconnect the earmould from the tubing.
2. Clean the vent with the wax removing tool.
3. Clean the sound bore with the wax removing tool.
1
2
3
4. At least once a week disconnect the earmould
from the tubing and rinse the earmould thorough-
ly in lukewarm water. Allow it to dry overnight.
5. If there is still moisture in the earmould, use a
blower or similar to blow it dry before attaching
the earmould to the tubing.
Changing the tubing
If your ear-set tubing becomes slack, stiff, yellow or
cracked, replace the tubing.
For further supplies of tubing or if the earmould no
longer fits your ear, contact your hearing care profes-
sional.
4
5