User's Manual Part 2
34
35
A small bell appears in the display. If you
want to change the alarm setting, press [(•)].
e bell disappears and you can change the
setting using the [+] [–] and [
] [
] keys. To re-
activate the alarm (the small bell), press the [(•)] key.
If you want the display to show the program/volume
again, press the [(•)] key and hold it down while
pressing the [
] key.
When the alarm starts, the letters AL and the small
bell will be displayed alternately, and the hearing
aid will beep. e beeps are repeated approximately
every ½ minute and the bell continues to blink until
you turn off the alarm.
To turn off the alarm, hold the [(•)] key down for
½ second.
Caring for your remote control
With proper care, your RC3-2 remote control will
give you a long life of reliable service. Here are some
things you can do to prolong the life of your remote
control:
• Treat your remote control with care. When it is
not in use, keep it in a cool, dry location where it
cannot be reached by children or pets.
• Do not expose it to extreme temperatures or high
humidity.
• Never try to open or repair your remote control
yourself.
• Clean the remote control with a soft cloth. Never
wash your remote control with water, cleaning
solutions or other liquids.