User’s instructions SCOLA™ FM system SCOLA CLASSMATE
The SCOLA CLASSMATE and accessories shown in these user’s instructions may differ from the ones you have. We furthermore reserve the right to make any changes considered necessary. 2 Contents SCOLA CLASSMATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SCOLA CLASSMATE and accessories . . . . . . . . . . . . . . 6 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The SCOLA™ FM communication system from Widex provides hearing aid users with additional opportunities in difficult listening situations. SCOLA CLASSMATE and the other parts of the SCOLA system are developed specifically for children and educational environments. These instructions therefore primarily address parents and teachers.
SCOLA CLASSMATE and accessories SCOLA CLASSMATE Description Mechanical design The maximum thickness of the unit is 110 mm. Stand LED indicator behind the front plate. The LED indicates different conditions depending on status. Wall mount Screws and fasteners The size of the rear plate is 125 x 193 mm. Holes for the wall mount. Power supply and extension cord User´s instructions User’s instrUc SCOLA™ FM Sy tions SteM SCOLA 6 CLASSM ATE 1. On/off button 2. Extra socket 3.
How does SCOLA CLASSMATE work? During the first minute after SCOLA CLASSMATE has been turned on, the synchronisation channel can be programmed into the memory. This is done with a SCOLA TEACH33/44 or SCOLA programmer. Response to synchronisation signals A SCOLA FLEX that has gone into “sleep” mode after a period of not receiving any transmission signal from an FM transmitter will first “wake up” and then be synchronised to the channel used in the classroom.
Installation Placement SCOLA CLASSMATE is intended to be mounted on a wall in the classroom or placed in its stand on a shelf or table. We recommend that it is placed about 1.5 m above the floor. The best way to ensure correct channel synchronisation is to place the SCOLA CLASSMATE close to the entrance door. Wall mounting 1. Find a convenient location for mounting the SCOLA CLASSMATE. 2. Use the wall mount as a guide to mark the location of the two holes. 3. Drill the holes in the wall. 4.
5. Insert the screws through the wall mount washers and screw the screws into the holes. Take care not to bend the wall mount during mounting. 6. Plug the power supply into the USB connector. Use the provided extension cord, if necessary. In the stand on a shelf If the SCOLA CLASSMATE is not intended to be located permanently in one place, for example if it is needed for testing in different classrooms, it can be placed in its stand as shown. 7.
LED legend Operation The LED indicates as follows: Switching the SCOLA CLASSMATE on/off Press the on/off button to turn the SCOLA CLASSMATE on. Constant red: 1. Normal function on external power 2.
Programming During the first minute after the SCOLA CLASSMATE is switched on, it is possible to set / change the synchronisation channel. Set the SCOLA TEACH33/44 to the required channel, or set the SCOLA programmer to the appropriate channel in “Set channel” under the “ FLEX programming” menu. Hold the SCOLA TEACH33/44 / SCOLA programmer within a distance of approximately 50 cm from the SCOLA CLASSMATE and press the “Enter” button.
6. Please be sure to keep all SCOLA units, accessories and hearing aids out of the reach of children, who might place them in their mouths. 7. Do not use SCOLA CLASSMATE on aeroplanes or in hospitals without permission. 8. If you use the SCOLA FM system together with equipment which is connected to the electrical mains, this equipment must meet the safety requirements stated in the international standard IEC 60065. 9. Do not use two transmitters (e.g.
Warranty Specifications and compliance A two-year international warranty is provided. The warranty covers all material and manufacturing defects. Defects arising from improper handling or repairs carried out by an unauthorised party are not covered by this warranty. Radio transmitter: short range inductive technology Frequency: 3.714 MHz Magnetic field strength: - 15 dB uA / m @ 10 m Compliance: Electromagnetic directive: SCOLA CLASSMATE contains a very weak inductive radio transmitter.
Statements for use in the USA and Canada FCC ID: BRG-871T IC: 5676A-871T SCOLA CLASSMATE contains a radio transmitter with: Federal Communications Commission Statement FCC ID: U28EZYNC01 IC: 1350B-EZYNC01 The device complies with Part 15 of the FCC rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. REGULATORY INFORMATION Dans le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.
SCOLA CLASSMATE and accessories should not be disposed of with normal household waste. Please consult your national Widex distributor for advice on how to properly dispose of these items.
MANUFACTURER ¡9 514 0196 001J¤ ¡#01v¤ Printed by HTO / 2013-10 9 514 0125 001 #01
