Instruction Manual

Function Max ranges
Partner microphone 20 cm from speaker to the device
Tabletop microphone 1.5 m from speaker to the device
Turning Sound Assist on and o
To turn on and o, press and hold the power/mode button (1.6) for 2
seconds.
Changing the operating mode
The Sound Assist has three operating modes: Remote Microphone, Blue-
tooth and Telecoil. The current operating mode is shown by the three
mode light indicators (1.8).
When the device is turned on, press the power/mode button (1.6) briefly
to toggle between the device modes.
Adjusting stream volume
Turn the volume of streamed sound up (+) and down (-) by briefly
pressing one of the two volume buttons (1.1).
Room o, i.e. is the possibility of shutting out surrounding sounds in the
room by muting the hearing aid microphones while streaming audio from
your device. The function is activated by a long press on the volume down
button (-) and deactivated by a long press on the volume up button (+).
12