Specifications

ManualsBrandsWiFiRanger, A LinOra ManualsComputers & AccessoriesHigh Power Wireless Router/AP

WiFiRanger, A LinOra Company Teton V3.0

High Power Wireless Router/AP

Model：Teton V3.0

Description:

Teton V3.0 is a wireless enterprise routerAP. It has built-in Qualcomm enterprise

QCA9531 CPU, large flash and high speed memory, strong data processing

capability and support dual frequency concurrency,it is a reliable and

flexiblenetworking deviceproviding security, and speed for enterprises..

Features:

1. Using Qualcomm QCA9531 cpu frequency 600Mhz

2. Large memory and large storage design to meet different needs

3. Meet the standard of IEEE 802.11n, IEEE 802.11g/b/,

4. Support PPPoE, dynamic IP, static IP and other broadband access methods

5. Support 2.0 USB interface for fast shared mobile storage network,or 4G

access to it

6. Industrial grade design, the power supply and network port are support

surge 4KV, and electrostatic 8KV which tested in lab

7. Hardware watchdog design, working unobstructed in a whole day

8. Support Open-Wrt system, which is convenient for customers to develop by

themselves

Summary of content (8 pages)

PAGE 1
WiFiRanger, A LinOra Company Teton V3.0 High Power Wireless Router/AP Model：Teton V3.0 Description: Teton V3.0 is a wireless enterprise routerAP. It has built-in Qualcomm enterprise QCA9531 CPU, large flash and high speed memory, strong data processing capability and support dual frequency concurrency,it is a reliable and flexiblenetworking deviceproviding security, and speed for enterprises.. Features: 1. Using Qualcomm QCA9531 cpu frequency 600Mhz 2.
PAGE 2
WiFiRanger, A LinOra Company Teton V3.0 Specification Protocol IEEE802.11N/G/B Chipset QCA9531 ,CPU main frequency is 600Mhz RAM Defualt DDR2:128MB FLASH Defualt 16MB Wireless Speed Rate 2.4G:2T2R:300Mbps Working Frequency 2.4Ghz Supports 1 10/100M self-adaption LAN/WAN with auto flip (Auto MDI/MDIX)(24V POE) Support 1 2.0 USB Interface Support 2 MINI PCIE (usb 2.0) Support micro SD card Support 4G mini pcie Support more GPIO application interface Max.
PAGE 3
WiFiRanger, A LinOra Company OFDM 54Mbps≤-70 Teton V3.0 MCS7/15≤-65 MCS7/15≤-62 Wireless security function switch; Wireless Security 64/128/152 bit WEP encryption; WPA-PSK/WPA2-PSK, WPA/WPA2 security mechanism; WPS fast security settings Support AP, router, relay, 4G function, etc.
PAGE 4
WiFiRanger, A LinOra Company Product Application: Intelligent Transportation: 1. HD electronic bayonet application 2. HD electronic police application 3. Road wireless video SurveillanceVehicle monitoring: 1. Bus wireless video surveillance 2. Taxi video surveillance 3. Bus video surveillance Security monitoring: 1. Security wireless mobile detection system 2. Security wireless video surveillance Industrial monitoring: 1. Site wireless video surveillance 2.
PAGE 5
WiFiRanger, A LinOra Company Teton V3.0 FCC WARNING FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 6
WiFiRanger, A LinOra Company Teton V3.0 Requirement per KDB996369 D03 2.2 List of applicable FCC rules List the FCC rules that are applicable to the modular transmitter. These are the rules that specifically establish the bands of operation, the power, spurious emissions, and operating fundamental frequencies. DO NOT list compliance to unintentional-radiator rules (Part 15 Subpart B) since that is not a condition of a module grant that is extended to a host manufacturer. See also Section 2.
PAGE 7
WiFiRanger, A LinOra Company Teton V3.0 2.6 RF exposure considerations It is essential for module grantees to clearly and explicitly state the RF exposure conditions that permit a host product manufacturer to use the module.
PAGE 8
WiFiRanger, A LinOra Company Teton V3.0 The grantee should provide information on how to configure test modes for host product evaluation for different operational conditions for a stand-alone modular transmitter in a host, versus with multiple, simultaneously transmitting modules or other transmitters in a host. Grantees can increase the utility of their modular transmitters by providing special means, modes, or instructions that simulates or characterizes a connection by enabling a transmitter.