User's Manual

Wifx L1 User manual revision 1.0
EN
9
4 GENERAL INFORMATION
4.1 ONLINE DOCUMENTATION
The online documentation is available at iot.wifx.net/docs and contains information about technical use of the
product including its operating system, the LORIX OS.
Complete documentation
The documentation in this user manual is minimal and more information, especially regarding LORIX OS, is
available online. Please consult it if you can’t find the information in this document.
4.1.1 UPDATE INFORMATION
The modifications made between each new release of LORIX OS are described under the online documentation
changelog page available at https://iot.wifx.net/docs/go/lorix-os/release-notes.
4.1.2 TROUBLESHOOTING
Frequent encountered problems are summarized under the online documentation troubleshooting page, with
suggested solutions available at https://iot.wifx.net/docs/go/lorix-os/troubleshooting.
4.1.3 OPEN SOURCE LICENSES
All the licenses of the open source softwares used or available in the package repository of the LORIX OS are available
at https://download.wifx.net/lorix-os/<LORIX OS release version>/licenses/, for example for the version 1.3.4, the
licenses are available at https://download.wifx.net/lorix-os/1.3.4/licenses/.
4.2 CONNECTIVITY/INTERFACE
4.3 START/RESET
The gateway automatically boots when connected to a power supply through passive PoE on the Ethernet cable or
through USB-C. After start-up, the status LED should blink briefly and turn off. Once the Linux OS starts, the status
LED (blue) will start blinking in “heartbeat” mode.
As soon as the service terminal can be used through the service USB-C connector, the service access LED (white)
turns on.
The reset button can be used to:
▪ reset normally the gateway and start in normal operating mode
▪ restore the gateway close to its original factory settings
▪ enter in programming mode.