User Guide

• Press the STB button once. Note: The STB button
should light up.
• To set up the Entone Kamai or
Amino Amulet 6 Set-Top Boxes,
press and hold SETUP and
the Green D button until
the CABLE POWER button
ashes twice.
• To set up the Amino 140 or 540
Set-Top Boxes, press and
hold SETUP and the Yellow
A button until the CABLE
POWER button ashes twice.
1. On your Wightman TV remote control, press and
hold the SETUP button until it blinks twice.
2. Press the TV POWER button.
3. Press and hold the OK/SELECT button.
4. Let go of the OK/SELECT button when the TV
turns o.
• Press the STB button once. Note: The STB button
should light up.
• To set up for Entone
Set-Top Boxes (Kamai
5, Amulet 6, Kamai 7X,
Amulet 7XM), press and hold SETUP
and the Yellow button until
the Set-Top Box blinks twice.
• To set up the Amino
140 or 540 Set-Top
Boxes, hold SETUP
and the Blue button together
until the Set-Top Box
blinks twice.
1. Press and hold the SETUP button until LED light
blinks twice.
2. Press TV button.
3. Press and hold OK key.
4. Release key when device turns o.
MIS_TV_Remote_ALL_Set_Up_22-06
Power on your TV through the TV itself or with the remote control that came with your TV.
Ensure that your Wightman TV remote control has new batteries installed. Note: Wightman TV remotes use two AA batteries.
• Press the STB button once. Note: The STB button
should light up.
• To set up the Entone Kamai or Amino Amulet 6 Set-
Top Boxes, press and hold SETUP and the number
7 until the STB button blinks
twice.
• To set up the
Amino 140 or 540 Set-Top Boxes,
press and hold SETUP and
the number 1 until the STB
button blinks twice.
• To test the Wightman remote
with the Set-Top Box, press
guide and channel change.
• To learn more about your
remote, tune in to Wightman
channel 991.
1. On your Wightman TV remote control, press TV
once; the TV button will blink once. Then press
and hold SETUP until the TV button blinks twice.
2. Press the numbers 9-9-1.
3. The TV button will blink twice.
4. Press and release the CH+ button once every
second until the TV turns o. NOTE: In this search
mode, the remote control will send codes from
its library to the selected device, starting with the
most popular code rst.
5. If your TV turned o, press SETUP once to lock in
the code. The TV button will blink twice to indicate
that the code is saved. If your TV did not turn o,
please restart steps 1-4.
6. Press POWER to turn your TV back on.
For support and full remote control manufacturer’s guides, visit wightman.ca/support/tv
Technical Support | Available 24/7/365 | 1-877-327-4440 | [e-mail]
Potenza Remote
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
SET-TOP BOX
SET UP YOUR WIGHTMAN TV REMOTE TO CONTROL YOUR
TV
Royal Big Button Remote
Nova Remote
Entone Kamai
Amino Amulet 6
Amino 140 or 540
Entone Kamai
Amino Amulet 6
Amino 140 or 540
Entone Kamai
Amino Amulet 6
Amino 140 or 540
Wightman TV Remote Set-Up Guide
BEFORE STARTING: