Owner's manual
7041 M9T
49er MaxxTor bit, Phillips, style E 6.3.
Material: High quality alloyed tool steel, optimally hardened.
Casing of transparent, impact resistant plastic.
Geometry: Extremely long torsion zone individually matched to the profile.
Precision-milled profile for perfect fit and maximum performance.
Drive: DIN 3126, ISO 1173, style C 6.3.
Packaging: 5 Bits in a plastic box.
Plastic box, reusable and dust repellent.
Application: Service life several times longer than 50 mm standard bits with impact
use.
The ultimate impact bit.
Ideally suited for high-performance impact screwdrivers.
Extra: Two-component construction – Plastic coating for increased work safety.
Practical laser marking for easy identification of size.
7042 M9T
49er MaxxTor bit, Pozidriv, style E 6.3.
5 Bits in a plastic box.
7045 M9T
49er MaxxTor bit, TORX
®
, style E 6.3.
5 Bits in a plastic box.
163
www.wiha.com
7011 M9T
29er MaxxTor bit, Phillips, style C 6.3.
Material: High quality alloyed tool steel, optimally hardened.
Casing of transparent, impact resistant plastic.
Geometry: Maximum length torsion zone individually matched to the profile.
Precision-milled profile for perfect fit and maximum performance.
Drive: DIN 3126, ISO 1173, Form C 6.3, also compatible with bit mount for E 6.3
bits.
Packaging: 5 Bits in a plastic box.
Plastic box, reusable and dust repellent.
Application: Service life several times longer than 25 mm standard bits.
The ultimate torsion bit. Ideally suited for high-performance drill and
impact screwdrivers.
Extra: Plus 4 mm length.
Additional range.
A better view of the bit tip.
Simpler bit change with extended grip zone.
Two-component construction – Plastic coating for increased work safety.
Practical laser marking for easy identification of size.
7012 M9T
29er MaxxTor bit, Pozidriv, style C 6.3.
5 Bits in a plastic box.
7015 M9T
29er MaxxTor bit, TORX
®
, style C 6.3.
5 Bits in a plastic box.
7013 M9T
29er MaxxTor bit, hexagon, style C 6.3.
5 Bits in a plastic box.
Thanks to innovative 2-component
technology, equipped for increa-
sing demands: the MaxxTor bits
offer a level of safety and service
life unknown until now.
High-performance drill and impact
screwdrivers place tough demands
on bits, for example via changing
loads with impact screwdrivers or
especially tough fastenings. Thus
standard bits are quickly unable to
meet the challenge.
That's not the case with MaxxTor
bits! With their maximum torsion
zone (MaxxTor), the service life of
the bits is significantly increased.
162
Wiha MaxxTor bits.
The 2-component bit.
A further plus factor: with length
extension from 25 to 29 mm the
bits now reach low-lying fastening
elements. Thanks to the length ex-
tension, direct insertion into the
E6.3 drives of impact screwdriver
machines is simple.
And the impact-tested quality and
hardness is dependable. Added to
this is optimal guidance and high
work safety with the CA cover. This
protects from injuries due to flying
parts with shattering.
Together with the innovative Bit-
Buddy bit holder, the bits can be
easily changed with one hand and
securely stored.
7043 M9T
49er MaxxTor bit, hexagon, style E 6.3.
5 Bits in a plastic box.
Perfectly adapted: with its 2-com-
ponent construction the MaxxTor
bit solves problems where stan-
dard bits fail.
In a word: top performance, especi-
ally with tough fastenings.
Wiha MaxxTor bits.
•
Maximum service life thanks to
maximum torsion zone
•
The ideal torsion bit: 29-series
and 49-series
•
Optimal hardness for high loads
and especially tough fastenings
•
For high-performance drill and
impact screwdrivers
•
29 mm: an additional 4 mm for
significantly improved access
•
Innovative 2-component con-
struction
•
Maximum safety due to pro-
tective CA cover
•
For all applications: PH, PZ, Torx
and hexagon
Available from 1. September 2012
49-series MaxxTor bit.
O
rder-No.
3
6828 PH1 49
5
36829 PH2 49 5
36830 PH3 49 5
Order-No.
36831 PZ1 49 5
36832 PZ2 49 5
36833 PZ3 49 5
Order-No.
36838 T10 49 5
36839 T15 49 5
36840 T20 49 5
36841 T25 49 5
36842 T30 49 5
36843 T40 49 5
29-series MaxxTor bit.
Order-No.
36812 PH1 29 5
36813 PH2 29 5
36814 PH3 29 5
Order-No.
36815 PZ1 29 5
36816 PZ2 29 5
36817 PZ3 29 5
Order-No.
36822 T10 29 5
36823 T15 29 5
36824 T20 29 5
36825 T25 29 5
36826 T30 29 5
36827 T40 29 5
Order-No.
36818 3.0 29 5
36819 4.0 29 5
36820 5.0 29 5
36821 6.0 29 5
NEW
NEW
NEW
NEW
Order-No.
36834 3.0 49 5
36835 4.0 49 5
36836 5.0 49 5
36837 6.0 49 5
NEW
NEW
NEW
NEW
0 10 20 30 40 50 60
Angel of twist
Torque (Nm)