Owner's manual

167
www.wiha.com
7010 D
Diamond torsion bit, slotted, style C 6.3.
Material: High grade chrome-vanadium steel, through hardened.
Geometry: Torsion zone for protecting against premature breakage of bits under load.
Coating: Extremely wear-resistant diamond-sapphire coating with a long service life.
Drive: DIN 3126, ISO 1173, style C 6.3.
Application: For fatigue-free work; ideal bit for frequent working.
Extra: Non-corrosive coating.
Diamond particles and sapphire particles for optimum torque transfer and
a secure grip in the screw head.
7011 D
Diamond torsion bit, Phillips, style C 6.3.
Material: High grade chrome-vanadium steel, through hardened.
Geometry: Patented torsion zone to prevent premature breaking of the bit when
under stress.
Coating: Extremely wear-resistant diamond-sapphire coating with a long service life.
Drive: DIN 3126, ISO 1173, style C 6.3.
Application: For fatigue-free work; ideal bit for frequent working.
Extra: Non-corrosive coating.
Diamond particles and sapphire particles for optimum torque transfer and
a secure grip in the screw head.
7012 D
Diamond torsion bit, Pozidriv, style C 6.3.
Material: High grade chrome-vanadium steel, through hardened.
Geometry: Patented torsion zone to prevent premature breaking of the bit when
under stress.
Coating: Extremely wear-resistant diamond-sapphire coating with a long service life.
Drive: DIN 3126, ISO 1173, style C 6.3.
Application: For fatigue-free work; ideal bit for frequent working.
Extra: Non-corrosive coating.
Diamond particles and sapphire particles for optimum torque transfer and
a secure grip in the screw head.
7015 D
Diamond torsion bit, TORX
®
, style C 6.3.
Material: High grade chrome-vanadium steel, through hardened.
Geometry: Torsion zone for protecting against premature breakage of bits under load.
Coating: Extremely wear-resistant diamond-sapphire coating with a long service life.
Drive: DIN 3126, ISO 1173, style C 6.3.
Application: For fatigue-free work; ideal bit for frequent working.
Extra: Non-corrosive coating.
Diamond particles and sapphire particles for optimum torque transfer and
a secure grip in the screw head.
7041 D
Diamond torsion bit, Phillips, style E 6.3.
Material: High grade chrome-vanadium steel, through hardened.
Geometry: Patented torsion zone to prevent premature breaking of the bit when
under stress.
Coating: Extremely wear-resistant diamond-sapphire coating with a long service life.
Drive: DIN 3126, ISO 1173, style E 6.3.
Application: For fatigue-free work; ideal bit for frequent working.
Extra: Non-corrosive coating.
Diamond particles and sapphire particles for optimum torque transfer and
a secure grip in the screw head.
7042 D
Diamond torsion bit, Pozidriv, style E 6.3.
Material: High grade chrome-vanadium steel, through hardened.
Geometry: Patented torsion zone to prevent premature breaking of the bit when
under stress.
Coating: Extremely wear-resistant diamond-sapphire coating with a long service life.
Drive: DIN 3126, ISO 1173, style E 6.3.
Application: For fatigue-free work; ideal bit for frequent working.
Extra: Non-corrosive coating.
Diamond particles and sapphire particles for optimum torque transfer and
a secure grip in the screw head.
166
Wiha diamond bit.
Saves strength, time & money.
Finest diamond particles
and sapphire particles
ensure a firm grip a
thousand times over.
The Diamond torsion bit from Wiha scores
on two accounts:
it reduces the amount of pressure that has
to be applied and increases the tool life.
The torsion zone protects against torque
peaks.
Diamond torsion bits supplement
Wiha’s range of high-quality spe-
cial bits. In the area of mechanical
fastening the significantly greater
tool life means substantial cost
reductions. The new Wiha diamond
torsion bits are recognisable by
their silver look and striking black
tip and offer an impressively
secure grip in the screw.
Wiha diamond bit.
•
Reduction of:
- Pressure forces to be applied
- Wear and tear of bit and screw
head
- The amount of time to
turn the screw and thus
reduction in the costs of
screw applications
- Cam-out effect
•
Extended service life as
a result of the improved
torsion zone
•
Nickel coating of the entire
bit for extra-long corrosion
resistance
Style C 6.3 (1/4").
Order-No.
21272 4.5 25 0.6 10
21216 5.5 25 0.8 10
21220 6.5 25 1.2 10
Order-No.
21193 PH1 25 10
21194 PH2 25 10
21196 PH3 25 10
Order-No.
21198 PZ1 25 10
21200 PZ2 25 10
21202 PZ3 25 10
Style C 6.3 and E 6.3 (1/4").
Order-No.
21204 T10 25 10
21206 T15 25 10
21208 T20 25 10
21210 T25 25 10
21212 T30 25 10
21214 T40 25 10
Order-No.
23376 PH1 50 5
23378 PH2 50 5
23380 PH3 50 5
Order-No.
23382 PZ1 50 5
23384 PZ2 50 5
23386 PZ3 50 5