User Manual

ManualsBrandsWiha Tools ManualsToolsL-Keys

L-keys

ErgoStar holder

ProStar holder

Compact holder

Classic holder

PocketStar holder

ComfortGrip T-handle

Classic T-handle

Flag handle

Key handle

Drive

Slotted Phillips

Pozidriv

TORX

Tamper

Resistant

Hex

(mm, Inch)

Nut

Driver

(mm, Inch)

Square

nut

Hex with

pivot

Multi-

tooth

TORX

PLUS

133-141

133, 137

134,

138-139

119-125,

130-131

123,

125-128

121,

123-131

143-144,

146

141 135, 141

144, 146 144-146 145

117-131 129 140

144,146

148-149149

151-153 152-153 152154 154

157 157

156156 156

Offset screwdriver

157 157157

TORX

Wiha L-keys.

Wiha makes it possible: Perfect technic for professional work.

110

EN_s110-157_Stift_2012 15.02.12 13:34 Seite 110

Summary of content (48 pages)

PAGE 1
EN_s110-157_Stift_2012 15.02.12 13:34 Seite 110 Wiha L-keys. Wiha makes it possible: Perfect technic for professional work.
PAGE 2
EN_s110-157_Stift_2012 15.02.12 13:34 Seite 111 www.wiha.com L-key range Wiha product range overview / holder overview All Wiha L-key holders at a glance ......................................................................................................... 111 – 113 Wiha product advantages (specialised solutions) All Wiha product advantages at a glance ........................................................................................
PAGE 3
EN_s110-157_Stift_2012 15.02.12 13:34 Seite 112 Wiha product range overview / holder overview All Wiha L-key holders at a glance Holders ErgoStar holder Holder type Description Features ProStar holder Compact holder Classic holder Two-row holder Two-row holder Two-row holder Single-row holder Wiha ErgoStar: this holder stands for comfortable and fast handling. Mechanical operation in form of rotating enables simple and rapid access to each key without being hindered by the other keys.
PAGE 4
EN_s110-157_Stift_2012 15.02.12 13:34 Seite 113 www.wiha.com Roll-up bag Box Key ring Key ring Roll-up bag Box Bag for variable equipping. A practical sliding box for the Wiha L-keys is available to protect against the impact of dirt. • Variable equipping • Protection against the impact of dirt Workbench stand Workbench stand The perfect solution for daily access at the workbench.
PAGE 5
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 114 Wiha product advantages (specialised solutions) All Wiha product advantages at a glance Holders Logo Application images Description Ball end The Wiha ball end stands for mobility, thus enabling fastening of allen screws up to 30° per side. TORX® ball end The Wiha ball end stands for mobility, thus enabling fastening of TORX® screws up to 25° per side.
PAGE 6
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 115 www.wiha.
PAGE 7
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 116 Wiha ErgoStar. He's fastening on to something good. Extremely agile: the new ball end now enables fastenings up to an angle of 30°. Wiha ErgoStar. The trick with the new Wiha ErgoStar is as simple as it is eﬀective: rotating a single L-key in the holder means that all other keys rotate to the side at the same angle! That means: there's no more complicated disentangling of adjacent keys any more.
PAGE 8
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 117 www.wiha.com For Allen screws (metric). For Allen screws (metric). SW 10 369S Blade: Standards: Application: Extra: Order-No. 34755 34756 34757 34758 34759 34760 34761 34762 34763 Ball end hex L-key, long. Chrome vanadium steel, through-hardened, brilliant chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. The ball end enables fastening and unfastening at an angle of up to 30°. 1.5 2 2.
PAGE 9
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 118 Wiha MagicRing® hexagon L-key. Securely holds hexagon bolts in place in any position. MagicRing® holds all standard screws! • DIN 6912 • DIN 7984 • DIN EN ISO 4762 • DIN EN ISO 10642 • DIN EN ISO 4026 • DIN EN ISO 4027 • DIN EN ISO 4028 • DIN EN ISO 4029 • DIN EN ISO 7380 Wiha MagicRing® hexagon L-key. Wiha hex keys with MagicRing® guarantee the perfect location of hex screws in every position.
PAGE 10
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 119 www.wiha.com For Allen screws (metric). 369R Blade: Standards: Application: Extra: Order-No. 20549 20550 20570 20551 20552 20553 369R S9 Blade: Standards: Application: Extra: Order-No. 20709 SB 369R S9 Order-No. 20712 Displays. Ball end hex L-key, long. With MagicRing®. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Insert screws into or remove from boreholes, especially in difﬁcult to access areas.
PAGE 11
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 120 Wiha MagicRing® hexagon L-key. Securely holds hexagon bolts in place in any position. For Allen screws (inch). For Allen screws (inch). 369R Zoll NEW 369R HZ13 Blade: Standards: Application: Extra: Order-No. 29471 29472 29474 29473 29475 24302 24304 24303 24305 24306 24307 24308 24341 Ball end hex L-key, long. With MagicRing®. Inch sizes. Chrome-vanadium steel, through hardened, chrome-plated. Based on ASME B18.3.
PAGE 12
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 121 www.wiha.com Wiha hexagon L-key (metric). For Allen screws (metric). For Allen screws (metric). –60% 95° NEW 369T Blade: Standards: Application: Extra: Order-No. 35482 35483 35484 35485 35486 35487 35488 35489 35490 369F Blade: Standards: Application: Extra: Ball end hex L-key, long. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Specially for hard-to-reach screws and conﬁned spaces.
PAGE 13
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 122 Wiha hexagon L-key (metric). For Allen screws (metric). 369 Blade: Standards: Application: Extra: Order-No. 01392 01393 01395 01396 01398 01400 01402 07922 01404 01406 01408 36452 SB 369 Order-No. 08161 08162 08163 08164 08165 08166 08167 08168 08169 08170 For Allen screws (metric). Ball end hex L-key, long. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L. Especially for screws that are difﬁcult to access.
PAGE 14
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 123 www.wiha.com For Allen screws (metric). For Allen screws (metric). NEW 369 H11 369 H7 Blade: Standards: Application: Extra: Order-No. 36453 NEW SB 369 H11 Order-No. 36454 369 H9 Blade: Standards: Application: Extra: Order-No. 01418 SB 369 H9 Order-No. 02292 Hexagon ball end L-key set in Compact holder. Chrome-plated, 11 pcs. Chrome-vanadium steel, through hardened, chrome-plated. Based on ISO 2936L.
PAGE 15
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 124 Wiha hexagon L-key (metric). For Allen screws (metric). 369B Blade: Standards: Application: Extra: Order-No. 01391 05638 03868 03869 03870 03871 03872 03873 03874 03875 03876 369 S9B Blade: Standards: Application: Extra: Order-No. 07186 SB 369 S9B Order-No. 07193 124 For Allen screws (metric). Ball end hex L-key, long. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Especially for screws that are difﬁcult to access.
PAGE 16
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 125 www.wiha.com For Allen screws (metric). For Allen screws (metric). 352 S9 369 H7B Blade: Standards: Application: Extra: Order-No. 03878 SB 369 H7B Order-No. 03991 Hexagon ball end L-key set in Classic holder. Manganese-phosphated, 7 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Especially for screws that are difﬁcult to access. Popular key sizes kept in a well-organised holder.
PAGE 17
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 126 Wiha hexagon L-key (metric). For Allen screws (metric). 352 H9 Blade: Standards: Extra: Order-No. 01222 352 H7 Blade: Standards: Extra: Order-No. 01220 352 B8 Blade: Standards: Extra: Order-No. 01216 For Allen screws (metric). 352B Blade: Standards: Hexagon L-key set in Compact holder. Nickel-plated, 9 pcs. Chrome-vanadium steel, through hardened, nickel-plated. Based on ISO 2936L.
PAGE 18
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 127 www.wiha.com For Allen screws (metric). 352 H9B Blade: Standards: Extra: Order-No. 06386 352 H7B Blade: Standards: Extra: Order-No. 06384 For Allen screws (metric). Hexagon L-key set in Classic holder. Manganese-phosphated, 9 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ISO 2936L. Popular key sizes kept in a well-organised holder. Simple, rapid operation with solid stopping point for L-keys. 352 H9B 352B 5 1.
PAGE 19
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 128 Wiha hexagon L-key (metric). For Allen screws (metric). For Allen screws (metric). 351 H9 351 B8 Blade: Standards: Extra: Order-No. 01174 SB 351 H9 Order-No. 03734 Hexagon L-key set in Compact holder. Nickel-plated, 9 pcs. Chrome-vanadium steel, through hardened, nickel-plated. ISO 2936K. Thanks to its compact dimensions, this holder ﬁts easily into every ruler pocket. Popular key sizes kept in a well-organised holder.
PAGE 20
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 129 www.wiha.com For Allen screws (metric). 359 Blade: Standards: Application: Order-No. 01255 01256 01257 01258 01259 01260 01261 01262 01263 NEW 359T5 Blade: Standards: Application: Extra: Order-No. 33391 For Allen screws (metric). 350 Blade: Standards: Hex L-key with pivot. Chrome-vanadium steel, through hardened, nickel-plated. DIN 6911. Fits hex socket screws with low head and centre hole. With key guidance according to DIN 6912.
PAGE 21
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 130 Wiha hexagon L-key (inch). For Allen screws (inch). For Allen screws (inch). 369 Zoll 369 SZ13B Blade: Standards: Application: Extra: Order-No. 01422 01423 01431 01427 01433 01425 01434 01430 01426 01432 01424 01429 01428 Ball end hex L-key, long. Inch sizes. Chrome-vanadium steel, through hardened, manganese-phosphated. Based on ASME B18.3. Especially for inch-sized screws that are difﬁcult to access.
PAGE 22
EN_s110-157_Stift_2012 15.02.12 13:35 Seite 131 www.wiha.com For Allen screws (inch). For Allen screws (inch). 351 Zoll 351 SZ13 Blade: Standards: Application: Order-No. 25626 01184 01194 01189 22406 01187 01200 01193 01188 01197 01186 01192 01191 01185 01198 01195 01190 Hex L-key, short. Inch sizes. Chrome-vanadium steel, through hardened, nickel-plated. Based on ASME B18.3. For all popular inch screws. 0.
PAGE 23
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 132 Wiha TORX® MagicSpring®. Holds TORX® and TORX PLUS® screws securely in place. Wiha MagicSpring®: a stainless steel spring securely holds TORX® and TORX PLUS® screws. Wiha TORX® MagicSpring®. No more annoying and timeconsuming hunting around for TORX® or TORX PLUS® screws that have apparently vanished into thin air. With Wiha’s ingenious new tool, the MagicSpring®, TORX® or TORX PLUS® screws* are kept ﬁrmly where you want them.
PAGE 24
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 133 www.wiha.com For TORX® screws. 366R Blade: Application: Order-No. 31233 31234 31235 31236 31237 31238 31239 31240 31241 31242 31243 31244 For TORX® screws. TORX® MagicSpring® L-key, long. Retaining spring holds TORX® screws in place. Chrome-vanadium steel, through hardened, manganese-phosphated. For setting and tightening TORX® screws in difﬁcult to access areas.
PAGE 25
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 134 Wiha TORX® MagicSpring®. Holds TORX® and TORX PLUS® screws securely in place. For TORX® screws. For TORX® screws. 366R SZ13 366R H8 Blade: Application: Extra: Order-No. 31492 TORX® MagicSpring® L-key set in ProStar holder, 13-pcs. Retaining spring holds TORX® screws in place. Chrome-vanadium steel, through hardened, manganese-phosphated. For setting and tightening TORX® screws in difﬁcult to access areas.
PAGE 26
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 135 www.wiha.com For TORX PLUS® screws. 371RIP Blade: Application: Extra: Attention: Order-No. 29197 29198 29199 29200 29201 29202 29203 29204 29205 29206 29207 For TORX PLUS® screws. TORX PLUS® L-key. With MagicSpring®. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX PLUS® screw tasks. MagicSpring® made from stainless steel holds TORX PLUS®-screws tight at various angles.
PAGE 27
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 136 Wiha TORX® ball end. Simpler, more powerful, safer. Plenty of room to manoeuvre: The ball end enables access to the TORX® screw at an angle of up to 25°. Tight spaces that only allow fastening and unfastening in at an angle: In these "problem zones" for TORX® screws, Wiha TORX® ball end tools are in demand.
PAGE 28
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 137 www.wiha.com For TORX® screws. 366BE Blade: Application: Extra: Order-No. 32386 32387 32388 32389 32390 32391 32392 32393 33749 33750 For TORX® screws. TORX® ball end L-key, long. Chrome-vanadium steel, through hardened, manganese-phosphated. For all hard-to-reach TORX® screws. The TORX® ball end enables fastening and unfastening at an angle of up to 25°. With elongated TORX® proﬁle behind ball end.
PAGE 29
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 138 Wiha TORX® ball end L-keys. For TORX® screws. 366BE SZ13 Blade: Application: Extra: Order-No. 33751 For TORX® screws. TORX® ball end L-key set in ProStar holder. Manganese-phosphated, 13 pcs. Chrome-vanadium steel, through hardened, manganese-phosphated. For all hard-to-reach TORX® screws. Space saving ProStar allows the easy removal of each key without moving any others. The TORX® ball end enables fastening and unfastening at an angle of up to 25°.
PAGE 30
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 139 www.wiha.com Wiha TORX® L-keys. For TORX® screws. 366 Blade: Application: Order-No. 24313 24314 24315 24316 24317 24318 24319 24320 24321 24322 24323 24324 24325 For TORX® screws. TORX® L-key, long. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications. T5 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T50 72 80 88 101 111 121 136 148 163 176 191 210 232 13 15 18 20 21 23 27 29 33 36 38 43 50 0.
PAGE 31
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 140 Wiha TORX® L-keys. For TORX® screws. 363 Blade: Application: Order-No. 03764 01310 01311 01312 01313 01314 01315 01316 01317 01318 01319 01320 01321 01322 01323 01324 For TORX® and XZN® multipoint socket screws. TORX® L-key, short. Chrome-vanadium steel, through hardened, manganese-phosphated. For all TORX® screw applications in conﬁned work spaces.
PAGE 32
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 141 www.wiha.com For TORX® Tamper Resistant screws. 363TR Blade: Application: Extra: Order-No. 24105 24107 24109 24111 24113 24115 24117 24119 24121 24123 NEW 363TR H8 Blade: Application: Extra: Order-No. 36462 For TORX PLUS® screws. TORX® Tamper Resistant L-key, short. Chrome-vanadium steel, through hardened, manganese-phosphated. For popular TORX® Tamper Resistant screws (with security pin). Borehole in every blade tip.
PAGE 33
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 142 Wiha PocketStar. Press one button for the correct key. The unique opening mechanism facilitates an easy selection of the desired key size. The Wiha PocketStar fold out oﬀers optimum handling and a wide variety of uses, which are expressed in the form of many practical details. The ingenious opening mechanism facilitates the simple selection of the required key size from the glass-ﬁbre-reinforced holder. Wiha PocketStar.
PAGE 34
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 143 www.wiha.com For Allen screws (metric). For Allen screws (metric). 351 PG7 369R P7 Blade: Handle: Application: Extra: Order-No. 23031 SB 369R P7 Order-No. 23033 Blade: Handle: Application: Ball end hex fold out holder PocketStar. With MagicRing®, in large PocketStar, 7 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 120 mm long.
PAGE 35
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 144 Wiha PocketStar. Press one button for the correct key. Mixed sets. For TORX® screws. 351 PG9X 363 P8 Blade: Handle: Application: Extra: Order-No. 25293 Fold out holder PocketStar containing assorted keys. In large PocketStar, 9 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 120 mm long. Practical fold out holder for hex, slotted, Phillips and TORX® screws in the workplace or on the job.
PAGE 36
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 145 www.wiha.com For TORX® Tamper Resistant screws. 363TR P8 Blade: Handle: Application: Extra: Order-No. 25130 Displays. TORX® Tamper Resistant fold out holder PocketStar. In large PocketStar, 8 pcs. Chrome-vanadium steel, through hardened, electro-plated. Ergonomic, reinforced ﬁbreglass housing, 120 mm long. Practical fold out holder for TORX® Tamper Resistant (with security pin) screws in the workplace or on the job.
PAGE 37
EN_s110-157_Stift_2012 15.02.12 13:36 Seite 146 Wiha Mini PocketStar. The smallest blade at the push of a button. The unique opening mechanism facilitates an easy selection of the desired key size. Wiha Mini PocketStar. Who hasn’t spent ages looking for the small SW 0.9 hex key or for other small keys? • All small keys are held together in the Mini PocketStar.
PAGE 38
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 147 www.wiha.com Wiha ComfortGrip T-handle. Soft zones for maximum working comfort. Side blade with through blade. Wiha ComfortGrip T-handle. The new Wiha T-handle with through blade for additional side blade features soft zones for the comfortable transmission of high torques.
PAGE 39
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 148 Wiha ComfortGrip T-handle. Soft zones for maximum working comfort. For Allen screws (metric). For Allen screws (metric). 540DS 334DS Blade: Handle: Application: Extra: Order-No. 28372 28373 28374 28375 28376 28377 334DSR Blade: Handle: Application: Extra: Order-No. 26135 26136 26137 26138 26139 26140 148 Hexagon ball end screwdriver with ComfortGrip. With side blade. Chrome-vanadium steel, through hardened, chrome-plated.
PAGE 40
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 149 www.wiha.com For TORX® screws. 364DS Blade: Handle: Application: Extra: Sets. TORX® driver with ComfortGrip. With side blade. Chrome-vanadium steel, through hardened, chrome-plated. Wiha ComfortGrip, the comfortable multi-component T-handle with soft zones for maximum working comfort. For comfortable high torque transfer. Especially useful for loosening or tightening screws that are hard to move.
PAGE 41
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 150 Wiha Classic T-handle. The classic for high torques. The handle design is such that the complete handle surface can be used, thus enabling optimum power transmission. The ergonomic design of the Wiha T-handle that ﬁts comfortably into the hand ensures optimum, symmetrical torque transmission from the hand through the blade to the screw.
PAGE 42
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 151 www.wiha.com For Allen screws (metric). 334R Blade: Handle: Application: Extra: Order-No. 22168 22170 22172 22174 21960 21962 For Allen screws (metric). Hex driver with T-handle. With MagicRing®. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. MagicRing® of spring steel (from size 3 mm) secures all hex standard screws independently of screw material in any position.
PAGE 43
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 152 Wiha Classic T-handle. The classic for high torques. For Allen screws (metric). 334 Blade: Handle: Application: Blade: Handle: Application: Extra: Order-No. 00953 152 336 Blade: Handle: Application: Extra: Hex driver with T-handle. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. Order-No. 00904 2 100 00905 2 200 00906 2.5 100 00907 2.
PAGE 44
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 153 www.wiha.com For hexagon bolts and Allen screws (metric). For hex nuts and hex socket screws. 334 Zoll 334N Blade: Handle: Application: Order-No. 02802 02803 02804 02805 02806 02807 02808 02809 02810 02811 Hex driver with T-handle. Inch sizes. Chrome-vanadium steel, through hardened, nickel-plated. Wiha Classic T-handle. For high torque transfer with minimal effort.
PAGE 45
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 154 Wiha Classic T-handle. The classic for high torques. For TORX® screws. 364 Blade: Handle: Application: Extra: Order-No. 01328 01329 01330 01331 01332 01333 01334 01335 01336 01337 01338 01339 01340 01341 01343 01345 For TORX® and TORX PLUS® screws. TORX® driver with T-handle. Chrome-vanadium steel, through hardened, chrome-plated. Wiha Classic T-handle. For high torque transfer with minimal effort. ChromTop® blade tip for the highest accuracy.
PAGE 46
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 155 www.wiha.com Wiha ﬂag and key handle. The knack of applying just the right amount of pressure. Innovative torsion blade in sizes T5 to T10 does not damage the expensive fastening screws or the tool proﬁle. Wiha ﬂag and key handle. Screwdrivers with ﬂag or key handles are used whenever replacing indexable inserts on milling heads.
PAGE 47
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 156 Wiha key handle. For Allen screws and TORX® screws. 331 Blade: Handle: Application: For TORX PLUS® screws. 365IP Blade: Handle: Application: Hex driver with key handle. Chrome-vanadium steel, through hardened, black-ﬁnish. Wiha key handle. For high torque transfer with small screws, especially when replacing indexable inserts on milling heads. Extra: Order-No. 00894 00895 00896 00897 365 Blade: Handle: Application: Order-No.
PAGE 48
EN_s110-157_Stift_2012 15.02.12 13:37 Seite 157 www.wiha.com Wiha flag handle and offset screwdriver. For TORX® and TORX PLUS® screws. 370 Blade: Handle: Application: Order-No. 03724 03725 03726 03727 03728 03729 03730 03731 TORX® driver with ﬂag handle. Chrome-vanadium steel, through hardened, black-ﬁnish. Wiha ﬂag handle. For high torque transfer with small screws, especially when replacing indexable inserts on milling heads. T5 T6 T7 T8 T9 T10 T15 T20 35 35 35 40 40 40 45 45 2.0 2.0 2.5 2.5 3.