Owner's manual

241
www.wiha.com
Z 01 9 16
Combination pliers Inomic
®
VDE.
Insulation up to 1000 V AC, GS-mark.
Standards: Manufactured acc. to IEC 60900:2004.
Head shape: With cutting edge for flat and round cable.
Design: Serrated gripping jaws.
Cutting edges additionally induction hardened to approx. 62 HRC.
Arms of the pliers move in parallel: +25% force transfer.
Angled shape (23°) for fatigue-free work.
With opening spring and locking mechanism.
M
aterial: Pliers head of high-quality tool steel.
Handles made of tough fibre-glass reinforced plastic,
ergonomic soft grip zone in the handle.
Application: For gripping, holding and cutting.
With improved access to the objects to be processed.
Z 06 9 16
Needle nose pliers Inomic
®
VDE.
Insulation up to 1000 V AC, GS-mark.
Standards: Manufactured acc. to IEC 60900:2004.
Head shape: Straight shape with blade and three stripping points 2.5 mm²,
1.5 mm², 0.75 mm².
Design:
Ridged gripping surfaces.
Cutting edges additionally induction hardened to approx. 62 HRC.
Arms of the pliers move in parallel: +25% force transfer.
Angled shape (23°) for fatigue-free work.
W
ith opening spring and locking mechanism.
Material: Pliers head of high-quality tool steel.
Handles made of tough fibre-glass reinforced plastic,
ergonomic soft grip zone in the handle.
Application: For gripping, holding, cutting and stripping.
With improved access to the objects to be processed.
Z 12 9 16
Diagonal cutters Inomic
®
VDE.
Insulation up to 1000 V AC, GS-mark.
Standards: Manufactured acc. to IEC 60900:2004.
Head shape: Innovative head with dual cutting function.
Cutting edge with bevel near the joint, cutting edge
without bevel in the front cutting area.
Design: Cutting edges additionally induction hardened to approx. 62 HRC.
Arms of the pliers move in parallel: +25% force transfer.
Angled shape (23°) for fatigue-free work.
With opening spring and locking mechanism.
Material: Head of pliers made of ball-bearing steel, hardened to approx. 60 HRC.
Handles made of tough fibre-glass reinforced plastic,
ergonomic soft grip zone in the handle.
Application: For cutting hard wires in the joint area.
Flush, burr-free cutting of soft wires, cables and plastics
in the front cutting area.
With improved access to the objects to be processed.
The Inomic
®
pliers are angled
at 23° to support the physiological
movement of the wrist when working
and thus prevent an unhealthy wrist
position, which often leads to problems
such as carpal tunnel syndrome.
Combination pliers.
Order-No.
30658 180 3.5 2.5 1.6 160 5
Needle nose pliers and diagonal cutters.
Order-No.
30661 160 2.5 1.6 155 5
Order-No.
30666 160 3.5 2.5 1.6 145 5
Details of cutting results of cutting pliers.
Symbol Types of wire Example Tensile strength ca. N/mm
2
Soft wire Copper, aluminium 220 - 250
Medium hard wire Iron nail 750 - 800
Hard wire Spring wire, steel nails 1.600 - 1.800
Piano wire Hardened spring steel 2.200 - 2.300
Test wires standardised in DIN ISO 5744
Radial
abduction
Ulnar
abduction
®
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.
EN_s230-281_Zangen_2012 15.02.12 17:41 Seite 241