Owner's manual
243
www.wiha.com
Z 01 0 05
Combination pliers Professional.
Standards: DIN ISO 5746.
Head shape: Extra long cutting edge for flat and round cables.
D
esign: OptiGrip - the newly designed gripping surface with 'triple-point support'
ensures optimal hold of the workpiece while working.
Cutting edges additionally induction hardened to approx. 62 HRC.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Material: High-quality tool steel, tempered.
Application: General purpose pliers for gripping and holding as well as cutting
soft and hard wires and cables.
Z 02 0 05
High leverage combination pliers Professional.
Standards: DIN ISO 5746.
Head shape: Extra long cutting edge for flat and round cables.
Design: OptiGrip - the newly designed gripping surface with 'triple-point support'
ensures optimal hold of the workpiece while working.
Particularly powerful leverage results in 40% less effort being required
for cutting tasks compared with standard combination pliers.
Cutting edges additionally inductively hardened to approx. 64 HRC,
therefore also appropriate for cutting piano wire.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Material: High-quality tool steel, specially tempered.
Application: Power assisted general purpose pliers for gripping and holding as well as
cutting wires and cables ranging in hardness from soft to extremely hard.
Z 55 0 05
Stripping pliers Professional.
Standards: DIN ISO 5743.
Head shape: Precision cutting edge prism for even cutting of cable insulation.
Design: An easy to use adjusting screw allows the stripping diameter to be set.
Opening spring for effortless and sensitive handling of pliers.
Material: High-quality tool steel, tempered.
Application: Simple stripping of cables and strands of up to ø 5 mm/ 10 mm²
conductor cross-section.
Z 07 0 05
Long-flat nose pliers Professional.
Standards: DIN ISO 5745.
Head shape: Extra long head.
Design: Ridged gripping surfaces.
Material: High-quality tool steel, tempered.
Application: Gripping and right-angled bending of wires and sheet metal parts.
Z 09 0 05
Long-round nose pliers Professional.
Standards: DIN ISO 5745.
Head shape: Extra long head.
Design: Ridged gripping surfaces.
Material: High-quality tool steel, tempered.
Application: Gripping and bending of wires and sheet metal parts.
Combination and high leverage combination pliers.
Order-No.
26704 160 6 ½ 3.0 2.0 195 5
26707 180 7 3.4 2.2 245 5
26710 200 8 3.6 2.5 325 5
Order-No.
26713 200 8 3.8 2.8 2.3 315 5
26716 225 9 4.4 3.0 2.5 370 5
Stripping, long-flat and round nose pliers.
Order-No.
26846 160 6 ½ 155 5
Order-No.
26731 160 6 ½ 160 5
Order-No.
26734 160 6 ½ 140 5
Details of cutting results of cutting pliers.
Symbol Types of wire Example Tensile strength ca. N/mm
2
Soft wire Copper, aluminium 220 - 250
Medium hard wire Iron nail 750 - 800
Hard wire Spring wire, steel nails 1.600 - 1.800
Piano wire Hardened spring steel 2.200 - 2.300
Test wires standardised in DIN ISO 5744
Wiha Info
NEW
Opti-Grip – optimal grip
due to newly designed gripping surfaces
•
A firm hold:
The 'triple-point support' protects the workpiece
from twisting or slipping.
•
Highly effective:
Optimum grip even with a large jaw opening –
and at the same time significantly less force needed
•
A wide selection:
Now in standard Wiha combination pliers
and high leverage combination pliers
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.
EN_s230-281_Zangen_2012 15.02.12 17:41 Seite 243