Owner's manual
244
Z 05 1 05
Needle nose pliers Professional with cutting edge.
Standards: DIN ISO 5745.
Head shape: Angled, approx. 40°.
Design: Extra long cutting edge for flat and round cables.
Gripping surfaces partially serrated in parts.
Cutting edges additionally induction hardened to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: Gripping and holding as well as cutting soft and hard wires and cables.
Preferred choice in the mechanical sector.
Z 12 0 05
D
iagonal cutters Professional.
Standards: DIN ISO 5749.
Head shape: Semi-circular, swedish style.
Design: Low wear lap joint, riveted and able to withstand high loads.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Lightweight action, clean cutting achieved by specially
milled precision cutting edges. Durable cutting edges due to
additional induction hardening to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: For soft and hard wires.
Z 16 0 05
Heavy duty diagonal cutters Professional.
Standards: DIN ISO 5749.
Head shape: Semi-circular.
Design: Low wear lap joint, riveted and able to withstand high levels of load.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges. Lightweight action, clean cutting achieved by
specially milled precision cutting edges. Long term cutting is achieved
through additional inductive hardening to approx. 64 HRC.
Material: High-quality tool steel, specially tempered.
Application: Power assisted, all round diagonal cutter for soft wire as well as the most
stringent of demands made by piano wires.
Z 05 0 05
Needle nose pliers Professional with cutting edge.
Standards: DIN ISO 5745.
H
ead shape: Straight shape.
Design: Extra long cutting edge for flat and round cables.
Gripping surfaces partially serrated in parts.
Cutting edges additionally induction hardened to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: Gripping and holding as well as cutting soft and hard wires and cables.
Preferred choice in the mechanical sector.
Needle nose pliers with cutting edge (snipe nose pliers).
Order-No.
26719 160 6 ½ 2.5 1.8 155 5
26722 200 8 2.8 2.0 200 5
Order-No.
26724 160 6 ½ 2.5 1.8 155 5
26726 200 8 2.8 2.0 200 5
Diagonal cutters and heavy duty diagonal cutters.
Order-No.
26736 140 5 ½ 4.0 2.5 1.8 160 5
26740 160 6 ½ 4.0 2.8 2.0 200 5
26743 180 7 4.0 3.0 2.5 250 5
Order-No.
26747 160 6 ½ 3.5 2.5 2.0 190 5
26750 180 7 3.8 2.7 2.3 260 5
26753 200 8 4.2 3.0 2.5 315 5
Wiha Professional.
Quality down to the last detail.
Wiha Info
Wiha DynamicJoint –
Top of their class
•
Innovative:
Unique joint construction,
patent applied for
•
Effective:
Low loss of force means
less force needed for cutting –
up to 40%
•
Permanent:
Optimal performance even
after thousands of cuts
Up to 40% less force for cutting
Details of cutting results of cutting pliers.
Symbol Types of wire Example Tensile strength ca. N/mm
2
Soft wire Copper, aluminium 220 - 250
Medium hard wire Iron nail 750 - 800
Hard wire Spring wire, steel nails 1.600 - 1.800
Piano wire Hardened spring steel 2.200 - 2.300
Test wires standardised in DIN ISO 5744
1
2
3
- 9,6 kg
- 12,6 kg
Competitors
TÜV Süd test,
October 2009
Less force of power:
EN_s230-281_Zangen_2012 15.02.12 17:42 Seite 244