Owner's manual

252
Z 62 0 000 06
Crimp tools for wire-end sleeves.
Head shape: Square crimp, linear pressing.
Design: Tool with only one crimp profile.
Automatic adjustment of cross-section area.
L
ateral contact feed.
Low hand force required with optimal transmission.
Delockable force lock for ensuring complete crimping process;
required crimp pressure is factory set.
Ergonomically formed soft handle with slip protection
for especially comfortable handling.
Material: Of high-tensile special steel.
Parts subject to extreme loading are specially hardened and tempered.
Application: For processing of wire-end sleeves with and without isolating collar
according to DIN 46228, EN 50027.
Especially suitable for processing twin sleeves.
Z 62 0 001 06
Crimp tools for wire-end sleeves.
Head shape: Trapezoid crimp, radial travel.
Design: Crimp profile:
Profile 1. 0.14 - 0.75 mm² / AWG 26 - 18
Profile 2. 1.0 - 1.5 mm²/ AWG 18 - 16
Profile 3. 2.5 mm² / AWG 14
Profile 4. 4.0 mm² / AWG 12
Profile 5. 6.0 mm²/ AWG 10
Profile 6. 10.0 mm² / AWG 8
Delockable force lock for ensuring complete crimping process;
required crimp pressure is factory set. Ergonomically formed soft handle
with slip protection for especially comfortable handling.
Material: Of high-tensile special steel.
Parts subject to extreme loading are specially hardened and tempered.
Application: For processing of wire-end sleeves with and without isolating collar
according to DIN 46228, EN 50027.
Z 62 0 002 06
Crimping tools for isolated cable eyes and contacts.
Head shape: Oval crimp, radial pressing.
Conducting and isolating crimp are carried out in one work step.
Design: Crimp profile:
Red profile: 0.5 - 1.0 mm² / AWG 20 - 16
Blue profile: 1.5 - 2.5 mm²/ AWG 16 - 14
Yellow profile: 4.0 - 6.0 mm² / AWG 12 - 10
Delockable force lock for ensuring complete crimping process;
required crimp pressure is factory set.Ergonomically formed soft handle
with slip protection for especially comfortable handling.
Material: Of high-tensile special steel.
Parts subject to extreme loading are specially hardened and tempered.
Application: For processing of red, blue and yellow isolated cable eyes,
pin-end cable connectors, contact pins, contact pin sleeves,
circular pins, circular pin sleeves, batch connectors
and parallel connectors according to DIN 46234.
For standardised, solderless electrical connections.
Z 62 0 004 06
Crimping tools for non-isolated cable eyes with closed sleeve.
Head shape: W injection, radial pressing.
Design: Crimp profile:
Profile 1. 0.1 - 0.5 mm² / AWG 26 - 20
Profile 2. 0.5 - 2.5 mm² / AWG 20 - 14
Profile 3. 4.0 - 6.0 mm² / AWG 12 - 10
Profile 4. 10.0 - 16.0 mm² / AWG 8 - 6
Delockable force lock for ensuring complete crimping process;
required crimp pressure is factory set. Ergonomically formed soft handle
with slip protection for especially comfortable handling.
Material: Of high-tensile special steel.
Parts subject to extreme loading are specially hardened and tempered.
Application: For processing of non-isolated cable eyes, pin-end cable connectors,
batch connectors and mini cable eyes
according to DIN 46234/ DIN 46230/ DIN 46341.
For solderless electrical connections according to standards.
Crimp tools.
Order-No.
33845 196 0.08 – 10 28 – 8 300 1
Order-No.
33844 220 0.14 – 10 26 – 8 510 1
Crimp tools.
Order-No.
33841 220 0.5 – 6 20 – 10 510 1
Order-No.
33843 220 0.1 – 16 26 – 6 510 1
Wiha crimp tools.
EN_s230-281_Zangen_2012 15.02.12 17:42 Seite 252