Owner's manual

254
246 2202
Cable stripper.
Design: Comfortable stripping with continuously adjustable cutting depth
per adjusting screw and self-turning inner cutter.
Damage to the inner conductor is therefore eliminated.
Self-tensioning holding lever for safe cable guide.
With cutter and hooked blade incl. safety cap for transport and storage.
Additional spare blades included in the tool.
Ergonomically designed construction.
Material: Impact resistant plastic housing made of Polyamide
r
einforced with glass-fibre.
Hooked blade and cutter are made of hardened steel.
Application: Precise, fast and safe stripping of all common round cable
from ø 4 mm – 28 mm.
Self-turning inner cutter for circular and longitudinal cutting.
2462202SB
Cable stripper.
Blister packed.
24678SB
Stripping knife for round cables.
Blister packed.
Standards: Manufactured acc. to IEC 60900:2004.
Design: Robust, fixed, sickle-shaped hooked blade.
Shoe-shaped blade tip limits the cutting depth and
prevents damage to conductors.
Protective cap for safe transport and protection of cutting edges.
Material: Insulating multi-component handle.
Blade of hardened, non-rusting steel.
Application: For stripping thick cables and cutting open
the various layers of multi-insulated cables.
For all work on or around electrical components up to 1000 V AC.
24677SB
Stripping tool for round cables.
Blister packed.
Design: Double layered, folding stripping tool with opening spring and
locking mechanism.
Setting of cutting depth not required.
Ergonomically designed tool body for non-slip, safe work.
Material: Housing of glass-fibre reinforced polyamide.
Application: Flush stripping of round and damp-proof cable from Ø 8 – 13 mm
(
e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm²), also for hard-to-reach locations
e.g. ceiling and wall areas, in junction boxes,
distribution boxes, switch cabinets etc.
24678SB
Stripping tool for coaxial cables.
Blister packed.
Design: Double layered, folding stripping tool with opening spring and
locking mechanism.
Setting of cutting depth not required.
Extra-long tool body for optimal handling.
With 5.0 - 20.0 mm length scale.
Material: Housing of glass-fibre reinforced polyamide.
Application: Incremental stripping of all commonly used coaxial cables
(e.g. antenna and transmission cables) from 4.8 – 7.5 mm outer diameter.
Also suitable for stripping of round cables
(e.g. NYM 3 x 0.75 mm², PVC flex 10 mm² and 16mm²).
Stripping tools.
Order-No.
35969 165 6 ½ 4.0 – 28 80 1
Order-No.
35538 165 6½ 4.0 – 28 1
Order-No.
36053 200 8 120 1
Crimping and stripping tool.
Order-No.
36052 125 5 8 - 13 45 1
Order-No.
36051 110 4¼ 4.8 - 7.5 30 1
Wiha crimping and
stripping tool.
NEW
NEW
NEW
N
EW
NEW
EN_s230-281_Zangen_2012 15.02.12 17:42 Seite 254