Owner's manual

Z 09 0 01
Classic long round-nose pliers.
Standards: DIN ISO 5745.
Head shape: Extra long head.
Design: Ridged gripping surfaces.
Material: High-quality tool steel, tempered.
Application: Gripping and bending of wires and sheet metal parts.
260
Z 01 0 01
Classic combination pliers.
Standards:
DIN ISO 5746.
Head shape: Extra long cutting edge for flat and round cables.
Design: OptiGrip - the newly designed gripping surface with 'triple-point support'
ensures optimal hold of the workpiece while working.
Cutting edges additionally induction hardened to approx. 62 HRC.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Material: High-quality tool steel, tempered.
Application: General purpose pliers for gripping and holding as well as cutting
s
oft and hard wires and cables.
Z 02 0 01
Classic high-leverage combination pliers.
Standards:
DIN ISO 5746.
Head shape: Extra long cutting edge for flat and round cables.
Design: OptiGrip - the newly designed gripping surface with 'triple-point support'
ensures optimal hold of the workpiece while working.
Particularly powerful leverage results in 40% less effort being required
for cutting tasks compared with standard combination pliers.
Cutting edges additionally inductively hardened to approx. 64 HRC,
therefore also appropriate for cutting piano wire.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges.
Material: High-quality tool steel, specially tempered.
Application:
Power assisted general purpose pliers for gripping and holding as well as
cutting wires and cables ranging in hardness from soft to extremely hard.
Z 07 0 01
Classic long flat-nose pliers.
Standards: DIN ISO 5745.
Head shape: Extra long head.
Design: Ridged gripping surfaces.
Material: High-quality tool steel, tempered.
Application: Gripping and right-angled bending of wires and sheet metal parts.
Order-No.
26733 160 6 ½ 110 5
Combination pliers and high-leverage combination pliers.
Order-No.
26703 160 6 ½ 3.0 2.0 160 5
26706 180 7 3.4 2.2 205 5
26709 200 8 3.6 2.5 280 5
Order-No.
26712 200 8 3.8 2.8 2.3 275 5
26715 225 9 4.2 3.0 2.5 330 5
Long-flat and needle nose pliers.
Order-No.
26730 160 6 ½ 130 5
Wiha Classic.
The complete workshop range.
Wiha Info
NEW
Opti-Grip – optimal grip
due to newly designed gripping surfaces
• A firm hold: The 'triple-point support'
protects the workpiece from twisting or slipping.
• Highly effective: Optimum grip even with a large jaw opening –
and at the same time significantly less force needed
• A wide selection: Now in standard Wiha combination pliers
and high leverage combination pliers
Wiha Info
Wiha DynamicJoint –
Top of their class
• Innovative: Unique joint construction
• Effective: Low loss of force means
less force needed for cutting – up to 40%
• Permanent: Optimal performance even after thousands of cuts
EN_s230-281_Zangen_2012 15.02.12 17:43 Seite 260