Owner's manual

Z 16 0 01
Classic heavy-duty diagonal cutters.
Standards: DIN ISO 5749.
Head shape: Semi-circular.
Design: Low wear lap joint, riveted and able to withstand high levels of load.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges. Lightweight action, clean cutting achieved by
specially milled precision cutting edges.
Long term cutting is achieved through additional inductive hardening
to approx. 64 HRC.
Material: High-quality tool steel, specially tempered.
Application: Power-assisted all-round diagonal cutter for cutting
soft to extremely hard wires and cables.
261
www.wiha.com
Z 05 0 01
Classic needle nose pliers with cutting edge.
Standards: DIN ISO 5745.
Head shape: Straight shape.
Design: Extra long cutting edge for flat and round cables.
Gripping surfaces partially serrated in parts.
Cutting edges additionally induction hardened to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: Gripping and holding as well as cutting soft and hard wires and cables.
Preferred choice in the mechanical sector.
Z 05 1 01
Classic needle nose pliers with cutting edge.
Standards: DIN ISO 5745.
Head shape: Angled, approx. 40°.
Design: Extra long cutting edge for flat and round cables.
Gripping surfaces partially serrated in parts.
Cutting edges additionally induction hardened to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: Gripping and holding as well as cutting soft and hard wires and cables.
Preferred choice in the mechanical sector.
Z 44 3 01
Classic precision mechanic's diagonal cutters with spring.
Standards: DIN ISO 5749.
Head shape: Semi-circular, swedish style.
Design: Low wear lap joint, riveted and able to withstand high loads.
L
ightweight action, clean cutting achieved by specially
milled precision cutting edges.
Long term cutting is achieved through additional inductive hardening
to approx. 60 HRC.
With spring and opening limit for effortless, sensitive working.
Material: High-quality tool steel, tempered.
Application: For almost flush cutting of soft and semi-hard wires.
Z 12 0 01
Classic diagonal cutters.
Standards: DIN ISO 5749.
Head shape: Semi-circular, swedish style.
Design: Low wear lap joint, riveted and able to withstand high loads.
The Wiha DynamicJoint ensures optimal transmission of hand strength
to the cutting edges. Lightweight action, clean cutting achieved by
specially milled precision cutting edges. Durable cutting edges due to
additional induction hardening
to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: For cutting of soft and hard wire.
Z36001
Precision mechanic's needle nose pliers with cutting edge and
spring.
Standards: DIN ISO 5745.
Head shape: Straight shape.
Design: Gripping surfaces partially serrated in parts.
Cutting edges additionally induction hardened to approx. 62 HRC.
With spring and opening limit for effortless, sensitive working.
Material: High-quality tool steel, tempered.
Application: Grip and hold as well as cut soft and hard wires and cables,
popular for precision mechanics and model-making applications.
Order-No.
26746 160 6 ½ 3.5 2.5 2.0 160 5
26749 180 7 3.8 2.7 2.3 220 5
26752 200 8 4.2 3.0 2.5 275 5
Needle nose and round-nose pliers.
Order-No.
26718 160 6 ½ 2.5 1.8 120 5
26721 200 8 2.8 2.0 165 5
Order-No.
26723 160 6 ½ 2.5 1.8 120 5
26725 200 8 2.8 2.0 165 5
Precision mechanic and diagonal cutters.
Order-No.
36189 125 6½ 2 0.8 65 5
Order-No.
26738 140 5 ½ 4.0 2.5 1.8 130 5
26739 160 6 ½ 4.0 2.8 2.0 170 5
26742 180 7 4.0 3.0 2.5 220 5
Order-No.
36483 160 6½ 2 1.2 95 5
NEW
N
EW
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.
EN_s230-281_Zangen_2012 15.02.12 17:43 Seite 261