Owner's manual

262
Z 50 1 01
Classic cable cutter pliers.
Head shape: Classic cutting form.
Design: Light, energy-saving and clean cutting with specially ground precision
cutting edges.
Durable cutting edges due to additional induction hardening
to approx. 62 HRC.
Safety stop prevents finger injuries after cutting.
Material: High-quality tool steel, tempered.
Application: Cable cutter for cutting of copper and aluminium cables without crushing,
also suitable for stripping.
Not for steel cable, wires and copper conductors with hard coatings.
Z 60 0 01
Classic crimping pliers.
Standards: DIN ISO 5743.
Head shape: Fixed profile grooves for the relevant conductor cross-sections.
Design: Trapezoidal or semi-circular profiles for a secure connection between
end sleeve and conductor.
Sleeve and conductor inserted from the side.
Material: High-quality tool steel, tempered.
Application: For crimping end sleeves acc. to DIN 46228 parts 1 + 4.
Z 55 0 01
Classic stripping pliers.
Standards: DIN ISO 5743.
Head shape: Precision cutting edge prism for even cutting of cable insulation.
Design: An easy to use adjusting screw allows the stripping diameter to be set.
Opening spring for effortless and sensitive handling of pliers.
Material: High-quality tool steel, tempered.
Application: Simple stripping of cables and strands of up to ø 5 mm/ 10 mm²
conductor cross-section.
Z
21 0 01
Classic water pump pliers, box type.
Standards: DIN ISO 8976.
H
ead shape: Narrow head, therefore also appropriate for work in small spaces.
Design: Precision adjustment joint, box type, providing optimum adaptation
to object to be gripped.
Long durability achieved by additional inductive hardening of gripper jaws.
Material: Chrome vanadium tool steel, tempered.
Application: For gripping and holding pipes and angular profiles such as hex nuts
in the installation area.
Z 22 0 01
Classic water pump pliers with push button adjustment.
Standards: DIN ISO 8976.
Head shape: Extra narrow head, therefore also appropriate for work in difficult
to access areas.
Design: Precision adjustment joint, box type, providing optimum adaptation
to object to be gripped.
Rapid and simple push button setting and locking.
Long durability achieved by additional inductive hardening of gripper jaws.
Material: Chrome vanadium tool steel, tempered.
Application: For gripping and holding pipes and angular profiles such as hex nuts
in the installation area.
Z 23 0 01
QuickFix Classic water pump pliers, box type.
Standards: DIN ISO 8976.
Head shape: Narrow head, therefore also appropriate for work in small spaces.
Design: Fast and easy-to-adjust water pump pliers, with automatic adjustment
of the box type, precision-stepped joint. Optimum adjustment
to the object to be gripped.
Long durability achieved by additional inductive hardening of gripper jaws.
Material: Chrome vanadium tool steel, tempered.
Application: For rapid and optimum gripping and holding of pipes and angular profiles
such as hex nuts in the installation area.
Cable cutter, wire-end sleeve and stripping pliers.
Order-No.
34729 160 6 ½ 16 50 150 5
34730 200 8 20 60 270 5
Order-No.
28330 145 5 ¾ 0.25-2.5 130 5
30066 180 7 0.25-16 250 5
Order-No.
26845 160 6 ½ 125 5
Water pump pliers.
Order-No.
26760 180 7 1 30 145 5
26761 250 10 2 50 345 5
26763 300 12 2 ½ 63 555 5
Order-No.
26764 180 7 1 30 150 5
26765 250 10 2 50 365 5
26767 300 12 2 ½ 63 570 5
Order-No.
26768 250 10 1 ½ 40 360 5
Wiha Classic.
The complete workshop range.
EN_s230-281_Zangen_2012 15.02.12 17:43 Seite 262