Owner's manual

263
www.wiha.com
Z 17 0 01
C
lassic heavy-duty end cutting nippers.
Standards: DIN ISO 5748.
Head shape: Classic style.
Design: Low wear lap joint, riveted and able to withstand high levels of load.
Striking high quality cutting edge with high cutting performance and
low application of force due to highly precise processing.
Good durability due to additional induction hardening of cutting edges
to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: Power assisted, all round diagonal cutter for soft wires as well as
demanding piano wires.
Also appropriate for binding (plaiting) and cutting wire netting
in reinforced concrete structures.
Z 30 0 01
Classic pincers (grip, edge pliers).
Standards: DIN ISO 9243.
Head shape: Classic style.
Design: Low wear lap joint, riveted and able to withstand high levels of load.
Striking high quality cutting edge with high cutting performance and
low application of force due to highly precise processing.
Good durability due to additional induction hardening of cutting edges
to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: For withdrawing and cutting nails and wire pins.
Z 31 0 01
C
lassic Monier pliers (rabitz pliers).
Standards: DIN ISO 9242.
Head shape: Classic style.
Design: Low wear lap joint, riveted and able to withstand high levels of load.
High quality cutting edge with high cutting performance and
low application of force due to highly precise processing.
Good durability due to additional induction hardening of cutting edges
to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: For binding (plaiting) and cutting wire netting in reinforced concrete
structures in a single operation.
Z 31 0 00
Classic Monier pliers (rabitz pliers).
Standards: DIN ISO 9242.
Head shape: Classic style.
Design: High quality cutting edge with high cutting performance and
low application of force due to highly precise processing.
Good durability due to additional induction hardening of cutting edges
to approx. 62 HRC.
Material: High-quality tool steel, tempered.
Application: For binding (plaiting) and cutting wire netting in reinforced concrete
structures in a single operation.
End cutting nippers and pincers.
Order-No.
26757 160 6 ½ 3.5 2.5 180 5
2
6758
1
80
7 3
.8
2
.8
2
00
5
26759 200 8 4.0 3.0 220 5
Order-No.
26771 180 7 265 5
26772 200 8 350 5
Monier pliers (rabitz pliers).
Order-No.
26774 220 8 ¾ 3.2 2.0 360 5
26776 250 10 3.5 2.2 425 5
26778 280 11 3.8 2.4 460 5
2
6780
3
00
1
2
3
.8
2
.4
4
85
5
Order-No.
26773 220 8 ¾ 3.2 2.0 350 5
26775 250 10 3.5 2.2 415 5
26777 280 11 3.8 2.4 450 5
26779 300 12 3.8 2.4 475 5
Wiha Info
Since pliers have moving parts and
sometimes have bright steel parts,
they require a certain amount of care:
Therefore keep the joints of the pliers as
clean as possible and occasionally give
them and the bright surfaces a drop of
low viscosity oil which does not contain
acid or resin.
You will then be able to enjoy your Wiha
quality pliers for a long time to come.
Opening width of water pump pliers.
Maximum gripper width across flats [mm]
Maximum gripper pipe diameter
[
"
]
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.
EN_s230-281_Zangen_2012 15.02.12 17:43 Seite 263