Owner's manual

266
Z 26 0 00
Classic corner pipe pliers, S-jaw.
Standards: DIN 5234.
Head shape: S-jaw shape angled 45°.
Design: Self-clamping gripping of pipes and hex nuts at 3 points.
T
orsion-free handle profile.
Adjusting nut secured to prevent loss.
Long durability achieved by additional inductive hardening of gripper jaws.
Material: Chrome-vanadium steel, tempered.
Application: Safe and secure grip on pipes and hex nuts.
Z 26 1 00
Classic corner pipe pliers, 45°.
Standards: DIN 5234.
Head shape: Swedish shape angled 45°.
Design: Safe and secure grip due to teeth that are offset against the direction of
rotation.
Torsion-free handle profile.
Adjusting nut secured to prevent loss.
Long durability achieved by additional inductive hardening of gripper jaws.
Material: Chrome-vanadium steel, tempered.
Application: Safe and secure grip on pipes, flat workpieces and nuts.
Z 26 2 00
Classic corner pipe pliers, 90°.
Standards: DIN 5234.
Head shape: Swedish shape angled 90°.
Design: Safe and secure grip due to teeth that are offset against the direction
o
f rotation.
Torsion-free handle profile.
Adjusting nut secured to prevent loss.
Long durability achieved by additional inductive hardening of gripper jaws.
Material: Chrome-vanadium steel, tempered.
Application: Safe and secure grip on pipes, flat workpieces and nuts.
Pipe wrenches swedish style.
Order-No.
29435 320 1 0-40 750 1
29436 420 1 ½ 0-55 1350 1
29437 535 2 0-67 2450 1
Order-No.
29438 315 1 0-40 750 1
29439 420 1 ½ 0-55 1240 1
29440 570 2 0-67 2500 1
Pipe wrenches swedish style.
Order-No.
29441 320 1 0-40 750 1
29442 415 1 ½ 0-55 1250 1
29443 555 2 0-67 2450 1
Wiha Classic.
The complete workshop range.
Jaw style: Cutter style:
Symbols.
Details of cutting results of cutting pliers.
Symbol Types of wire Example Tensile strength ca. N/mm
2
Soft wire Copper, aluminium 220 - 250
Medium hard wire Iron nail 750 - 800
Hard wire Spring wire, steel nails 1.600 - 1.800
Piano wire Hardened spring steel 2.200 - 2.300
Test wires standardised in DIN ISO 5744
Dimensions.
Maximum gripper width across flats
Maximum gripper pipe diameter
Opening width, flat
Clamping range
Retaining ring, external
Retaining ring, internal
Flat jaws
Half round jaws
Round jaws
Cutter without bevel
Cutter with small bevel
Cutter with bevel
Center cutter
Scissors cutter
Anvil cutter
Stripper
EN_s230-281_Zangen_2012 15.02.12 17:43 Seite 266