Owner's manual

271
www.wiha.com
Z 41 1 03
Diagonal cutters Electronic.
Head shape: Wide, pointed head.
Design: Cutting edge with full flush cutter function.
With opening spring.
Material: C 70 special tool steel.
Application: For an absolutely flush cut of soft wires in the electronics industry.
Z 41 3 03
Diagonal cutters Electronic.
Standards: DIN ISO 9654.
Head shape: Wide, pointed head.
Design: Cutting edge with semi-flush cutter function,
thus also appropriate for medium hard wires.
Strong design for soft wires up to ø 2.0 mm.
With opening spring.
Material: C 70 special tool steel.
Cutting edges > 60 HRC.
Application: Universal small diagonal cutter for cutting soft and medium hard wires in
the electronics and precision mechanical engineering industries.
Z
41 6 03
Diagonal cutters Electronic with wire trapping spring.
Head shape: Wide, pointed head.
Design: Cutting edge with full flush cutter function.
With opening spring and fixture for collecting ends
of wires that have been cut off.
Material: C 70 special tool steel.
Cutting edges approx. 56 HRC.
Application: For an absolutely flush cut of soft wires in the electronics industry.
1
0,0
5,0
21
o
13,5
10,0
6,0
21
o
13,5
10,0
6,0
21
o
13,5
Diagonal cutters, wide shape.
Order-No.
26818 138 5 ½ 1.3 70 5
Order-No.
26815 138 5 ½ 2.0 0.8 80 5
Diagonal cutters, wide shape with wire trapping spring.
Order-No.
26825 138 5 ½ 1.3 80 5
Wiha Info
Electronics pliers with cutting edges
are designed especially for cutting soft
to medium hard wires.
The diameters of materials which your
electronics pliers are able to cut depend
not only on the material selected and
the hardness of the cutting edges
but also depend greatly on the geometry
of the cutting edges:
• Pliers with the full flush cutter function
may cut off wires smoothly and flushly
but are only appropriate for soft copper
wires (99.85% pure copper)
• Pliers with the semi-flush and normal
bevelled cutting edges function on
the other hand may not cut in a totally
flush manner but can cut thin iron wires
or even medium hard steel wire
• You will find details of precise cutting
results in the individual figures of pliers
Details of cutting results of cutting pliers.
Symbol Types of wire Example Tensile strength ca. N/mm
2
Soft wire Copper, aluminium 220 - 250
Medium hard wire Iron nail 750 - 800
Hard wire Spring wire, steel nails 1.600 - 1.800
Piano wire Hardened spring steel 2.200 - 2.300
Test wires standardised in DIN ISO 5744
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.
EN_s230-281_Zangen_2012 15.02.12 17:44 Seite 271