Owner's manual
8,0
4,0
21
o
9,5
8,0
5,0
21
o
10,0
10,0
5,0
48
o
13, 5
10,0
4,0
3,5
30
o
272
Z 40 0 03
M
icro diagonal cutter Electronic.
Head shape: Extra narrow, short head for working in particularly restricted spaces.
Design: Cutting edge with full flush cutter function.
With opening spring.
Material: C 70 special tool steel.
Application: For absolutely flush cutting of soft wires in places
which are difficult to access in the electronics industry.
Z 40 1 03
Diagonal cutters Electronic with wire trapping spring.
Head shape: Narrow, pointed head.
Design: Cutting edge with full flush cutter function.
With opening spring and fixture for collecting ends
of wires that have been cut off.
Material: C 70 special tool steel.
Application: For absolutely flush cutting of soft wires in places
which are difficult to access in the electronics industry.
Z 46 0 03
O
blique cutting nippers Electronic.
Head shape: Wide, pointed head.
Design: Cutting edge with full flush cutter function.
With cutting edge at 48° for cutting obliquely from above or from the side.
Material: C 70 special tool steel.
Application: For absolutely flush cutting of soft wires in places
which are difficult to access in the electronics industry.
Z 46 0 03
Micro oblique cutting nippers Electronic.
Head shape: Extremely narrow, short head for working in particullarly restricted spaces.
Design: Cutting edge with full flush cutter function.
Edge at 30° to face end of pliers for cutting obliquely from above or
from the side.
Material: C 70 special tool steel.
Application: For absolutely flush cutting of soft wires in places
which are difficult to access in the electronics industry.
Diagonal cutters, narrow shape.
Order-No.
26812 118 4 ½ 0.8 60 5
Order-No.
26813 128 5 1.0 70 5
Diagonal cutters.
Order-No.
26833 138 5 ½ 1.3 70 5
Order-No.
26830 118 4 ½ 0.6 60 5
Wiha Electronic.
Precision for made-to-measure work.
Details of cutting results of cutting pliers.
Symbol Types of wire Example Tensile strength ca. N/mm
2
Soft wire Copper, aluminium 220 - 250
Medium hard wire Iron nail 750 - 800
Hard wire Spring wire, steel nails 1.600 - 1.800
Piano wire Hardened spring steel 2.200 - 2.300
Test wires standardised in DIN ISO 5744
EN_s230-281_Zangen_2012 15.02.12 17:44 Seite 272