Owner's manual

Z 47 1 04
End cutting nippers Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Extra narrow, slim shape.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of soft wires in places
which are particularly difficult to access.
276
Z 43 1 04
Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Narrow, semi-circular head.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of copper wire in places
which are difficult to access.
Z 44 1 04
Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, semi-circular head.
Design: Bevelled cutting edges, also appropriate for thin, hard wires.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: All round electronic diagonal cutter for cutting wires
of different hardnesses.
Z 44 3 04
Diagonal cutter Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide, semi-circular head.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of soft wires.
Z 46 1 04
Oblique end cutting nippers Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Wide head, angled at 29°.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting of soft wires.
Can be used horizontally and virtically.
Z 46 4 04
Oblique end cutting nippers Professional ESD.
Standards: DIN ISO 9654. IEC 61340-5-1.
Head shape: Extra narrow head.
Cutting edges angled at 40°.
Design: Cutting edge with full flush cutter function for virtually flush cutting.
Maximum service life of cutting edge achieved through additional inductive
hardening to approx. 64 HRC. With opening spring.
Surface resistance 10
6
- 10
9
ohms.
Material: High alloy carbon steel C 60.
Application: For virtually flush cutting thin, soft wires in places
which are particularly difficult to access.
10,5
9,5
6,0
10,0
14,0
29
o
7,5
12,0
13,5
11, 5
7,5
20,0
6,3
10,0
5,8
40
o
13,5
11, 5
7,5
6,5
19,0
2,8
5,8
Order-No.
26839 110 4 ¼ 0.6 65 5
Diagonal cutter, semi-circular shape.
Order-No.
26826 115 4 ½ 1.2 60 5
Order-No.
26831 115 4 ½ 1.4 1.0 0.4 60 5
Order-No.
26832 115 4 ½ 1.2 60 5
Oblique end cutters.
Order-No.
26835 115 4 ½ 1.2 78 5
Order-No.
26838 110 4 ¼ 0.6 42 5
Wiha Professional ESD.
Precise in every detail.
EN_s230-281_Zangen_2012 15.02.12 17:44 Seite 276