Brochure
www.wiha.com
Safety note:
When working with cutting pliers –
beware of wire ends flying away.
Please wear safety glasses.
281
Combination and high leverage combination pliers.
Z 01 0 02
Combination pliers Industrial.
Standards: DIN ISO 5746.
Head shape: Extra long cutting edge for flat and round cables.
Design: OptiGrip - the newly designed gripping surface with 'triple-point support'
ensures optimal hold of the workpiece while working.
Cutting edges additionally induction hardened to approx. 64 HRC.
The Wiha DynamicJoint
®
ensures optimal transmission of hand strength
to the cutting edges.
Material: High quality C 70 tool steel, tempered.
Application: General purpose pliers for gripping and holding as well as cutting soft
and hard wires and cables.
Order-No.
30979
160 6 ½ 3.1 2.0 1.6 195
5
34565
160 6 ½ 3.1 2.0 1.6 195 x
5
30826
180 7 3.4 2.2 1.8 245
5
34307
180 7 3.4 2.2 1.8 245 x
5
30978
200 8 3.8 2.5 2.0 325
5
34308
200 8 3.8 2.5 2.0 325 x
5
Z 02 0 02
High-leverage combination pliers Industrial.
Standards: DIN ISO 5746.
Head shape: Extra long cutting edge for flat and round cables.
Design: OptiGrip - the newly designed gripping surface with 'triple-point support'
ensures optimal hold of the workpiece while working.
Particularly powerful leverage results in 40% less effort being required
for cutting tasks compared with standard combination pliers.
Cutting edges additionally inductively hardened to approx. 64 HRC,
therefore also appropriate for cutting piano wire.
The Wiha DynamicJoint
®
ensures optimal transmission of hand strength
to the cutting edges.
Material: High quality C 70 tool steel, specially tempered.
Application: Power assisted general purpose pliers for gripping and holding as well
as cutting wires and cables ranging in hardness from soft to extremely
hard.
Order-No.
32319
200 8 3.8 2.8 2.3 315
5
34566
200 8 3.8 2.8 2.3 315 x
5
32320
225 9 4.4 3.0 2.5 390
5
34567
225 9 4.4 3.0 2.5 390 x
5
Needle nose pliers.
Z 05 0 02
Needle nose pliers Industrial with cutting edge.
Standards: DIN ISO 5745.
Head shape: Straight shape.
Design: Extra long cutting edge for flat and round cables.
Gripping surfaces partially serrated in parts.
Cutting edges additionally induction hardened to approx. 64 HRC.
Material: High quality C 70 tool steel, tempered.
Application: Gripping and holding as well as cutting soft and hard wires and cables.
Preferred choice in the mechanical sector.
Order-No.
32322
160 6 ½ 2.5 1.8 1.2 155
5
34309
160 6 ½ 2.5 1.8 1.2 156 x
5
32323
200 8 3.2 2.2 1.6 200
5
34515
200 8 3.2 2.2 1.6 200 x
5
Z 05 1 02
Needle nose pliers Industrial with cutting edge.
Standards: DIN ISO 5745.
Head shape: Angled, approx. 40°.
Design: Extra long cutting edge for flat and round cables.
Gripping surfaces partially serrated in parts.
Cutting edges additionally induction hardened to approx. 64 HRC.
Material: High quality C 70 tool steel, tempered.
Application: Gripping and holding as well as cutting soft and hard wires and cables.
Preferred choice in the mechanical sector.
Order-No.
32324
160 6 ½ 2.5 1.8 1.2 155
5
34569
160 6 ½ 2.5 1.8 1.2 155 x
5
32328
200 8 3.2 2.2 1.6 200
5
34570
200 8 3.2 2.2 1.6 200 x
5
Opti-Grip – optimal grip
due to newly designed gripping
surfaces
ō$ILUPKROG The 'triple-point support'
protects the workpiece from
twisting or slipping.
ō+LJKO\HIIHFWLYH Optimum grip even
with a large jaw opening – and at
the same time significantly
less force needed
ō$ZLGHVHOHFWLRQ Now in standard
Wiha combination pliers and high
leverage combination pliers
Wiha Info