Operation Manual

5
4. Water system
Table 3
Typ
Perfect
7000
Perfect
8000
Perfect
9000
Minimumwirecrosssection
[mm
2
]
2,5 2,5 2,5
Recommendedfuse[A] 17,5 20 22,5
5. Fitting
CAUTION!
The device can only work in position showed on drawing No 1.
Trying to start the device in position other than proper one or without
water lter will result in damaging heating element and deprivation of
guarantee.
Do not screw connecting hoses using high power in order to avoid
thread damage.
Do not seal stub pipe thread with tow or Teon™ sealing tape.
Save electronic system against water splashing.
1. Applypatternonplacetheheaterwillbeinstalled.Markplacesfordrilling holesfor
anchoringpegsandcable. 
Cablecanbeconnectedtotheheaterbyopeninginrearwallorbybrakingthinplastic
partunderhousing(g.3and4).