Owner's manual

Fig. 3: Position of the filter element with single and double chamber housing
1 Filter element for ventilation of the electronics housing
2 Blind stopper
Information:
Make sure that the filter element is always free of buildup during
operation. A high-pressure cleaner must not be used for cleaning.
Higher process temperatures mean often also higher ambient
temperatures.
1
2
Fig. 4: Temperature ranges
1 Process temperature
2 Ambient temperature
Make sure that the upper temperature limits for the environment of
electronics housing and connection cable specified in chapter
"Technical data" are not exceeded.
4.2 Mounting steps
To mount IPT-11, a welded socket is necessary. Use components
from the line of WIKA mounting accessories:
à Note the applicable welding standards (segment welding proce-
dure) when welding the socket.
Use the seal corresponding to the process fitting.
Temperature limits
Welding the socket
Sealing/Screwing in hy-
gienic fittings
Process pressure transmitter IPT-11 Vers. 4.0 - ceramic sensor • 4 … 20 mA 11
4 Mounting
37301-EN-100302