Owner's manual

3 Product description
3.1 Configuration
The scope of delivery encompasses:
l IPT-11 pressure transmitter
l Documentation
- this operating instructions manual
- Test certificate for pressure transmitters
- Safety Manual "IPT-1* - 4 … 20 mA/HART two-wire" (optional)
- Operating instructions manual "Indicating and adjustment
module" (optional)
- Supplementary instructions manual "Plug connector for con-
tinuously measuring sensors" (optional)
- Ex-specific "Safety instructions" (with Ex versions)
- if necessary, further certificates
The IPT-11 consist of the following components:
l Process fitting with measuring cell
l Housing with electronics, optionally available with plug connector
l Housing cover, optionally available with indicating and adjustment
module
The components are available in different versions.
1
2
3
Fig. 1: Example of a IPT-11 with process fitting G1½ A and plastic housing
1 Housing cover with integrated indicating and adjustment module (optional)
2 Housing with electronics
3 Process fitting with measuring cell
The type label contains the most important data for identification and
use of the instrument:
l Instrument type
l Article and serial number device
l Technical data: Measuring range, process pressure, process
temperature, signal output, voltage supply, protection, protection
class
l Order number
Scope of delivery
Constituents
Type label
Process pressure transmitter IPT-11 Vers. 4.0 - ceramic sensor • 4 … 20 mA 7
3 Product description
37301-EN-100302