User guide

Process conditions
The specifications to the pressure stage and the product temperature are used as an overview.
The specifications of the type label are applicable.
Pressure stage, process fitting
- Thread 316L, Hastelloy PN 160
- Small flange DN 10 316L PN 1.5
Product temperature depending on the measuring cell seal
- FKM (A+P 70, 16.06) -40 … +120 °C (-40 … +248 °F)
- FFKM (Kalrez 6375) -20 … +120 °C (-4 … +248 °F)
- FFKM (Chemraz 535) -30 … +120 °C (-22 … +248 °F)
- EPDM (A+P 75.5/KW75F) -40 … +120 °C (-40 … +248 °F)
Vibration capacitance mechanical vibrations with 4 g and 5 … 150 Hz
13)
Electromechanical data - version IP 66/IP 67
Cable entry/plug
14)
- Single chamber housing l 1 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5
or:
l 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
or:
l 1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5
- Double chamber housing l 1 x cable entry M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5; plug M12 x 1 for
the external indicating and adjustment module
(optional)
or:
l 1 x closing cap ½ NPT, 1 x blind stopper
½ NPT, plug M12 x 1 for the external indicating
and adjustment module (optional)
or:
l 1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5; plug M12 x 1 for the
external indicating and adjustment module
(optional)
Spring-loaded terminals for wire cross-sec-
tion up to
2.5 mm² (AWG 14)
13)
According to IEC 60098-2-6.
14)
Depending on the version M12 x 1, according to DIN 43650, Harting, 7/
8" FF.
Process pressure transmitter IPT-10 Vers. 2.0 - ceramic sensor • Profibus PA 45
10 Supplement
31541-EN-081211