User Manual

1
2
Fig. 3: Position of the filter elements
1 Filter element for ventilation of the measuring cell
2 Filter element for ventilation of the electronics housing
Information:
Make sure that the filter elements are always free of buildup during
operation. A pressure washer must not be used for cleaning.
Higher process temperatures mean often also higher ambient
temperatures.
1
2
Fig. 4: Temperature ranges
1 Process temperature
2 Ambient temperature
Make sure that the upper temperature limits for the environment of
electronics housing and connection cable specified in chapter
"Technical data" are not exceeded.
4.2 Mounting steps
To mount IPT-11, a welded socket is necessary. Use components
from the line of WIKA mounting accessories:
à Note the applicable welding standards (segment welding proce-
dure) when welding the socket.
Temperature limits
Welding the socket
Process pressure transmitter IPT-11 Vers. 4.0 - ceramic sensor • 4 … 20 mA/HART 11
4 Mounting
31546-EN-090130