Manual

Process conditions
The specifications to the pressure stage and the product temperature are used as an overview.
The specifications of the type label are applicable.
Pressure stage, process fitting
- Thread 316L, Hastelloy PN 160
- Small flange DN 10 316L PN 1.5
Product temperature depending on the measuring cell seal
- FKM (A+P 70, 16.06) -40 … +120 °C (-40 … +248 °F)
- FFKM (Kalrez 6375) -20 … +120 °C (-4 … +248 °F)
- FFKM (Chemraz 535) -30 … +120 °C (-22 … +248 °F)
- EPDM (A+P 75.5/KW75F) -40 … +120 °C (-40 … +248 °F)
Vibration capacitance mechanical vibrations with 4 g and 5 … 150 Hz
11)
Electromechanical data - version IP 66/IP 67
Cable entry/plug
12)
- Single chamber housing l 1 x cable gland M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5
or:
l 1 x closing cap ½ NPT, 1 x blind plug ½ NPT
or:
l 1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5
- Double chamber housing l 1 x cable entry M20 x 1.5 (cable: ø 5 … 9 mm),
1 x blind stopper M20 x 1.5; plug M12 x 1 for
the external indicating and adjustment module
(optional)
or:
l 1 x closing cap ½ NPT, 1 x blind stopper
½ NPT, plug M12 x 1 for the external indicating
and adjustment module (optional)
or:
l 1 x plug (depending on the version), 1 x blind
stopper M20 x 1.5; plug M12 x 1 for the
external indicating and adjustment module
(optional)
Spring-loaded terminals for wire cross-sec-
tion up to
2.5 mm² (AWG 14)
11)
According to IEC 60098-2-6.
12)
Depending on the version M12 x 1, according to DIN 43650, Harting, 7/
8" FF.
48 Process pressure transmitter IPT-10 Vers. 2.0 - ceramic sensor • 4 … 20 mA/HART
10 Supplement
31540-EN-090130