User guide

3 Product description
3.1 Configuration
The scope of delivery encompasses:
l IPT-1* Vers. 3.0 process pressure transmitter
l Documentation
- this operating instructions manual
- Operating instructions manual "Indicating and adjustment
module" (optional)
- Supplementary instructions manual "Plug connector for con-
tinuously measuring sensors" (optional)
- Ex-specific "Safety instructions" (with Ex-versions)
- if necessary, further certificates
Instruments in the version "Oil and grease-free for oxygen ap-
plications" are equipped with a supplementary label. The sup-
plementary label contains instructions on oil and grease-free parts of
the instrument.
IPT-1* Vers. 3.0 consists of the following components:
l Process fitting with measuring cell
l Housing with electronics, optionally available with plug connector
l Housing cover, optionally available with indicating and adjustment
module
The components are available in different versions.
1
2
3
Fig. 1: Example of a IPT-1* Vers. 3.0 with manometer connection G½ A
according to EN 837 and Alu housing
1 Housing cover with integrated indicating and adjustment module (optional)
2 Housing with electronics
3 Process fitting with measuring cell
The type label contains the most important data for identification and
use of the instrument:
l Article number
Scope of delivery
Supplementary label
"Oil and grease-free for
oxygen applications"
Components
Type label
Process pressure transmitter IPT-1* Vers. 3.0 - metalic sensor • Foundation Fieldbus 7
3 Product description
31545-EN-081211