Model # PD1 Timer Operating Instructions
Installation Timer Operating Instructions Product Line: Wildgame Innovations Replacement Timer Model#: PD1 Remove old timer by disconnecting the motor lead wires from the motor terminals and the power supply General Specifications wires (typically red and black in color) from the battery terminals.
Installation (cont.) Programming New Timer Setting Time: Connect to Battery: 1.Press the ▲ button, or Program button from 1.The PD1 timer is designed to be ran by a 6 or 12 volt “READY” mode to enter the “CLOCK” mode. Press the battery. We recommend a rechargeable type 6 or 12 Program button again to enter the clock settings. Use volt battery. the + or - buttons to set the desired hour, then press 2.
Programming Programming Setting Feed Time: Setting Motor Run Duration: 1. Once you have set the current time, then use the ▲ 1. After setting the hour and minutes, press the or ▼ buttons from “READY” mode to enter the appro- Program button again and use the + or - buttons to set priate feeding ( Feed.1 thru Feed.6). Once you have run time duration (adjust from 0 to 90 seconds per feed reached the proper feeding, press the Program button time).
Battery Charge Level Testing Unit Testing the Unit: 1.Test the unit by pressing the Test button. There will be a 10 second delay to allow you to turn your head away or get a safe distance away from the unit. The test will run for the duration as set for the first feed The digital timer is equipped with a battery charge level indicator as indicated by a 5 bar battery icon. The digital timer unit will display the battery charge level in real-time. time.
Troubleshooting - Short If you open the lid and notice the flashing “SHORT” message on the screen, proceed to check both the In the event the timer has a short (i.e., the wires are cut battery lead wires and motor lead wires to make sure or exposed and are touching metal that would interfere no copper is exposed and making contact with a metal with the current flow), while in operation, the timer surface.
Troubleshooting - Jam Maintenance - Battery In the event the paddle assembly of the unit jams while You will start to notice a reduction in the motor speed if in operation, the timer recognizes the error and stops your battery begins to lose its charge. If you notice the timer function immediately to protect the circuit such a reduction, replace the battery with a fresh 12 board from possible overload.
Maintenance - Weather Extreme cold or excessively hot weather can affect battery life. During these conditions check the battery often and replace if needed. Extreme cold weather may cause the LCD screen to react slowly until the temperature warms up. Despite the possible slowness of the LCD, the digital timer is working properly and wil go off as per the program.
FCC STATEMENT Product Name: Feeder Timer Trade Name: Wildgame Innovations Model# PD1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.