User`s manual

Setting Date
Trigger Flextime
Location
1.
Press the center navigation button
after setting the minute to change the
Day.
2.
Press the left or right navigation
button to go up or down in sequence.
3.
When the DAY is set, repeat steps 1
and 2 to set the Month and Year.
POWER
POWER
POWER
POWER
1.
Press the center navigation button
while Location is selected. The first
character will be blinking.
1.
Press the center navigation button
while Trigger is selected. The
highlighted option will be blinking.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
2.
Press the left or right navigation
button to go up or down in sequence.
Press the center navigation button
when the character shown is what you
want and move to the next character.
3.
Repeat steps 1 and 2 to set the rest of
the characters. Press the center
navigation button to skip spaces and
save the location name.
POWER
POWER
POWER
POWER
POWER
POWER
POWER
POWER
1.
Press the center navigation button
while Flextime is selected. The
highlighted option will be blinking.
2.
Press the left or right navigation
button to move to different options.
Press the center navigation button to
save the setting.
POWER
POWER
POWER
POWER
page 7
page 8
The Interval setting is set by the Delay
Setting on the camera with a 1 minute
minimum Flextime delay. See chart on
the next page for Flextime options.
NOTE: Camera needs at least 48 hours
in the field to acclimate to the environ-
ment for Flextime to function properly.
TRIGGER:
PIR MODE: Takes a photo or video only
when the PIR sensor is triggered.
FLEXTIME
(Time Lapse): Takes time lapse
images at set intervals during the key
movement periods of the day, depending
on your Flextime settings.
BOTH: Both PIR and Flextime are active.