Sewing Table- White Assembly Instructions
Sewing Table-White Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
1 Quantity Of 28 2 Quantity Of 11 Wood Dowel ∮8*30mm Cam Bolt ∮6.8*36mm 4 5 Quantity Of 2 Cover Quantity Of 2 Unlocking Caster 10 8 Quantity Of 2 11 Quantity Of 12 Small-Machine-screw M4 11 Screw Nut M4 Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the surface with rough or abrasive objects. Assembly Tool Required No.
Sewing Table-White Assembly Instruction Step 1: Tighten wood screws (11) through hinges (12) into predrilled holes on underside of large top panel and leaf panel (A) and (B) as shown. Step 2: Insert wood dowel (1) into predrilled hole on bottom edge of divider (J) and fit into corresponding hole on lower shelf (D). Insert T-bolt (6) into hole on divider (J) ensuring the slots for the screwdriver are facing out and visible.
Step 3: Insert wood dowels (1) into corresponding holes on right side panel (H). Place assembled unit on right side panel (H) making sure the wood dowels are inserted into the corresponding holes on assembled unit. Insert T-bolts (6) into the holes on parts (C, D, J) and tighten large machine screws (5) through holes on right side panel (H) into T-bolts (6). Please note that if screws do not tighten, rotate T-bolts (6) so that threads of T-bolt are facing.
Step 5: Fit casters (7) and (8) on bottom edge on side panel (H) and (I) by using small machine screws (9) and screw nuts (10). Insert wood dowels (1) into holes on the inside of side panel (H) and (I). Attach large shelf (E), bottom front stretcher (L), top stretcher (K) and back panel (F) to side panel (H) inserting wood dowels (1) into corresponding holes. Insert T-bolts (6) into the holes on parts (E) and (F) and tighten large machine screws (5) through holes on right side panel (H) into T-bolts (6).
Step 6: Insert wood dowels (1) and cam-bolts (2) into holes on underside of parts (A) and (B). Fit into corresponding holes on top edges of parts (H, I, J, K). Insert cam-locks (3) into corresponding holes on parts (H, I, J, K) with slot for screwdriver facing outward. Rotate cam-locks (3) clockwise to secure cam-bolts (2). Push covers (4) into cam-locks (3) as shown.
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Needed Parts Letter Parts Description Quantity