Video Security System User's Guide

Configuring Your Firewall User Guide
123
ZoneAlarm Firewall
Zone Labs produces several computer security packages including ZoneAlarm Pro and ZoneAlarm. Though
there are differences in the UI, they are largely the same. Like other PC firewall products, Zone Labs provides
both automatic and manual configuration interfaces. By default, ZoneAlarm will automatically prompt you to
allow Command Center.exe to both access the Internet and to act as a server. Follow these instructions to
ensure ZoneAlarm does not interfere with the operation of WiLife.
ENABLE COMMAND CENTER AUTOMATICALLY
When you first start Command Center, Zone Alarm will automatically provide you with a ZoneAlarm Security
Alert, asking you whether you want to block Command Center. You should always choose Allow when the
program name is Command Center.exe and the publisher is WiLife.
1) Run Command Center.
Check “Remember this setting” and click the Allow button on both the “New Program” and “Server
Program” dialogs.
ENABLE COMMAND CENTER MANUALLY
In some cases, you may need to manually configure ZoneAlarm. This process is not difficult. Follow these steps
to complete the manual firewall setup:
1) Open the ZoneAlarm control center either from the Start menu or by right-clicking on the ZoneAlarm
icon in the Windows Task bar.