User's Manual

1. Product Manual
1.1 Product Diagram
1.2 Product Interface
(1) WPS Button
(3) Phone Port
(5) USB port
(7) Power Switch
(9) SIM Card
(11) Power LED
(13) LTE LED
(2) WLAN ON/OFF Switch
(4) LAN Port
(6) DC Power
(8) Reset Button
(10) External ANT Interface
(12) WIFI/WPS LED
(14) Signal Strength LED
1.3 Indicator
Type Status Description
Power
Blue On The router is powered on
Blue Off The router is powered off
WLAN
Blue On WIFI is on and is transmitting data
Blue blink WPS
Blue Off WIFI closed
Internet
Blue Connected to the internet
Red Not connected
Signal
One Signal is poor
Two Signal is moderate
Three Signal is good
Four Signal is good
Five Signal is very good
1.4 Picture guide for installation of external antenna, LAN, adaptor
and PC.
2. Quick Configuration Guide
The router supports standard RJ45 cable or WLAN wireless to
connect to a computer. Supports Windows XP/Windows 7/Windows
8/Window 10/MAC OS/Linux/Android.
A. Insert the SIM Card according to the given instructions.
B. Connect the LAN cable to the LAN port and check to match the
power adapter label and device sticker before plugging into the
power outlet.
C. Set your computer network to obtain IP address automatically.
Once the computer gets the 1P address, open your web browser
WiLINQ D010U User Manual
Thank you for choosing WiLINQ D010U 4G wireless router. Please
read the user manual carefully.
• Turn off the router and unplug the power adapter before
installing any external panel antenna.
• Do not use external antenna during thunderstorms.
• Only use external antennas provided by your carrier.
3. Package Contents
4. Precautions
1 When you remove and insert the SIM card, please ensure the
device is powered off.
2 Do not use the equipment during thunderstorms and unplug
the external antenna and power adapter.
3 If the device is working fine, do not change the parameter or
other functions. If changed and you cannot access the Internet,
please try to reboot. Press and hold the reset button for more
than 5 seconds to restore the factory settings.
5. Common faults and treatment methods
Common Faults
Treatment Methods
The device is powered on but
the front panel power light is
off.
Check the power adapter if it's
properly plugged in the power
outlet and the device power
port. Check the cable for
any damage.
Computer local connection is
not displayed. Cannot
successfully PING IP address
of the device. Cannot
open the WEB page.
Check the computer’s LAN
network status. See if it
automatically obtains the
IP address from the device
DHCP pool. Reboot your
computer and your modem.
Clear your browsing history
/ CACHE. Check your LAN
cable if properly plugged in
the LAN port.
The device is working but
cannot access the internet
through the web
Set the computer to
automatically obtain the IP
address and DNS server
address.
and type the default gateway IP address “192.168.0.1."
D. Click “Login” in the upper right corner to access the user
page using the username and password indicated on the device
sticker at the bottom of the device.
E. Wi-Fi configuration
Wi-Fi is enabled by default, and the default Wi-Fi name and
password are provided on the device sticker label.
If you need to modify them, login first to the device website.
Click Device Settings > Wi-Fi-2.4GHz settings or Wi-Fi-5GHz setting and
then follow the instruction to set your own Wi-Fi password.
(1) 1 x D010U Router
(3) 1 x LAN Port Cable (RJ45)
(5) 2 x External Antenna
(2) WLAN ON/OFF Switch
(4) 1 x D010U User Manual