Installation manual Dimensionless” HO” L3 Bulb not included Lamp Frame Total Lightweight) 8 Thank vou for choosing out product(g). Ouy Company is actively involved in every step of the production, Our product(s) are designed to be utilized for every application that graces our home or business. We pride ourselves in providing the most prompt and courtesy service to all of the valued customers. Please find the enclosed detailed instruction and read carefully for proper installation.
D10” H9” L4 SAFETY Warning: MAKE SURE THE ELECTRICITY TO THE WIRES YOU ARE WORKING ON IS SHUT OFF.BY EITHER REMOVING THE FUSE OR TURNING OFF THE CIRCUIT BREAKER. CAUTION Before assembling the lighting fixture, please read all instructions carefully. — All frame & crystal components are fragile, please handle with care Required supply circuit : 110 130V/60Hz Labeled wires are “L” for live wire, “N” for neutral wire, “E” for ground wire.
D10” H9” L4 Step 1 Please use the parts list to ensure you are not missing any parts PARTS LIST part picture Description | Qty| Check list ZA Junction box 1 7B E==o == | Mounting bracket Metal ceiling plate Troubled nut Power Cord 12" 1 APT-1-16# Clear/Gold Pl (BOBBED 106" Lamp body Iron bracket 3 P3 9.
D10” H9” L4 Step 2 Canopy installation instructions ZA ZC Hot wire Neutral wire Ground wire D10” H9” L4 Important: This product must be installed in accordance with the local installation codes by a person familiar with construction and operation of this product and the hazards involved. 1. Black wire from ceiling(junction box) attaches to "L"wire from the fixture. 2. White wire from ceiling((junction box) attaches to "N"wire from the fixture. 3.
D10” H9” L4 Frame Assembly 02 06 07 B——0—mo o——— G 114~$ D10” H9” L4 Step 3 Frame Assembly Instructions Installation: Please read all instructions carefully. Before you proceed to install, make sure. that the power supply is turned off and remains off until installation is complete. Please note that each part has been assigned a number. Please proceed in a numerical order. 1.Fix the crossbar (01} on the installation 4”7 2.
D10” H9” L4 Step 4 Crystal Dressing Instructions 1. Hang crystal ~B¥ Y07 "D TR 2. ”A"part attached to the lamp body. D10” H9” L4 Crystal Dressing Diagram When dressing the chandelier with the crystals please remember Q@? to wear either rubber or cotton gloves. So as to prevent any damage or smudging on the crystals.
D10” H9” L4 Congratulations ! You are now done installing your fixture. Sit back and admire each crystal as it will become the statement piece for your room/house If you require any additional assistance, please contact us Thank you. D10” H9” L4 Cleaning and Maintenance of Chandelier Frame The finish on our chandelier frames and fixture frames is protected by a durable coating of lacquer. To clean, use a clean, soft, dry cloth.
D10” H9” L4 Warranty The finish and frame of your new chandelier or fixture are warranted for a period of from the date of purchase. Qur company will at its option, repair or replace any frame that has a defect in the material or workmanship during the warranty period.All crystals are guaranteed for their original quality during the life of the chandelier. Breakage is not covered by this warranty.