ASSEMBLY INSTRUCTION MIRRORED WINE CABINET Ly Cabinet Body Leg [«3 Shelf Wine Rack . E (hidden under . 785 x 390 x 15mm E the foam) ) E 1PC E PCS E 1PC o 1PC Handle Bolt Shelf Support Metal Screw 28mmx32mm 24mmx32mm 26mmx15mm (Pr-attached inside the door of the cabinet) PCS PCS PCS PCS Il Anti tipping Hardware Pack (inside the drawer of cabinet) PCS PCS PCS 1PC i PCS This page lists all the contents included in the box.
Remove the top foam and then take off the Leg (B) from the inside of the Foam as below drawing, and then attach the Leg (B) to Cabinet Body (A). n Attach the Shelf Support (G) to the side panel and then attach the Shelf (C) to the Shelf Support (G). Attach the Wine Rack (D) to the bottom panel of the cabinet by using Metal Screw (H). Screwdriver w not provided [ \
n Remove the Handle (E) with Bolt (F) from the inside of the door and then attach the Handle (E)} to the front door by using Bolt {F). Screwdriver : not provided \@ Remove the Anti-Tipping Hardware Pack (1) from inside drawer,assemble it to avoid tipping. 1.Attach one of the wall brackets (a) and secure to the back top the back edge of the cabinet using the short screw (b). 2 Mark the location on the wall for mounting the second wall bracket (a).