Installation & Assembly

ManualsBrandsWilla Arlo Interiors ManualsAccent FurnitureCalisto Mirrored Console Table

ASSEMBLY INSTRUCTION

Mirrored Top

Top Frame

Leg-C

1pc

2pcs

Leg-D

Bottom Frame

Mirror Shelf

2pcs

1pc

Drawer Knob

Bolt 1/4” X 5/8”

Bolt 1/4” X 1”

w/ Plastic Washer

1pc

14pcs

4pcs

End Cap

Glass Pad

Allen Wrench

4pcs

8pcs

1pc

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to

protect them from damage.

** Pre-attached to the inside of drawer **

MIRROR SOFA TABLE TV STAND WITH DRAWER

Summary of content (4 pages)

PAGE 1
ASSEMBLY INSTRUCTION MIRROR SOFA TABLE TV STAND WITH DRAWER A Mirrored Top B Top Frame C 1pc D 1pc E Leg-D 2pcs F Bottom Frame 2pcs G Drawer Knob Leg-C Mirror Shelf 1pc H 1pc I Bolt 1/4” X 5/8” Bolt 1/4” X 1” w/ Plastic Washer ** Pre-attached to the inside of drawer ** 1pc J 14pcs K End Cap 4pcs L Glass Pad 4pcs 8pcs Allen Wrench 1pc This page lists all the contents included in the box.
PAGE 2
*** Do not tighten screws & bolts until the entire unit is completely assembled. 1 Attach top frame (B) to mirrored top (A) by using bolt (H) and allen wrench (L) as shown. 2 Attach leg-C (C) and leg-D (D) to mirrored top (A) by using bolt (H) and allen wrench (L) as shown.
PAGE 3
Attach bottom frame (E) to leg-C (C) and leg-D (D) by using bolt (I) and allen wrench (L) as 4 Carefully turn the assembled unit upright. Attach glass pad (K) to bottom frame (E), and then place mirror shelf (F) into bottom frame (E) as shown. shown. Attach end cap (J) to leg-C (C) and leg-D (D). Please tighten all bolts at this step.
PAGE 4
5 Remove drawer knob w/ plastic washers (G) from inside of the drawer, and then reattach to drawer front as shown. The mirror sofa table TV stand assembly is now completed. ◎ - The two plastic washers are for the purpose of protecting mirror surface. Please place one of the washers inside of the drawer and place the other one between front of the drawer and drawer knob. Remove drawer knob w/ washers (H) from inside of the drawer and reattach on drawer front as shown. The desk assembly is now complete.